SCHOTT ASI Serie Anleitung Seite 14

This guide includes information about the safe use of thin
layer solar modules, including assembly, installation and
connection wiring as well as important information about
connecting to the power inverter. They are only for
specialists who are familiar with the installation due to
E N
their vocational qualification. The tasks described in these
instructions may only be carried-out by experts who are
qualified. If you do not possess appropriate qualifications,
you are not permitted to carry out the work described.
Read these instructions carefully and observe the
explanations.
The manufacturer assumes no liability for damages
incurred due to non-compliance of these instructions.
Please also observe the instructions for the other
components which make up the total photovoltaic
system.
This installation guide provides instructions for setting
up framed thin film solar modules by SCHOTT Solar in
outdoor open spaces (fields) or on flat roofs or mounting
them in a roof.
These instructions are part of the documentation of the
solar installation which contains the thin film solar
modules. Keep these instructions together with the
complete documentation.
Hand over these instructions to the system operator
(customer) following installation.
Draw attention to the fact that they should keep these
instructions together with the documentation for the
solar system.
Important customer information
Separate operator information (customer information)
is enclosed with these instructions. Hand them over to
your customer and ask that they read them carefully, to
observe them and to keep them together with all other
documentation for the solar system.
14
Manufacturer:
SCHOTT Solar Thin Film GmbH
Otto-Schott-Strasse 13
07745 Jena, Germany
Phone: +49 (0)6131/66-14034
Fax: +49 (0)6131/66-14105
solar.sales@schottsolar.com
www.schottsolar.com
01/2011
We reserve the right to make amendments
© 2011 SCHOTT Solar Thin Film GmbH