Control Panel Description; Menu Options; Dmx Values - Chaovet-DJ HURRICANE HAZE 1D Startanleitung

Hurricane Haze 1D QRG
Control Panel
Description
DMX Linking
Starting Address
Remote or
Manual
Operation

Menu Options

Mode
HAZe
Ht
Addr
(DMX Mode)

DMX Values

1-CH
Channel
1
Button
<MENU> Exits from the current menu or function
Navigates upwards through the menu list and increases the
<UP>
numeric value when in a function
Navigates downwards through the menu list and decreases the
<DOWN>
numeric value when in a function
<ENTER>
Enters into a menu or sets the currently displayed value
The Hurricane Haze 1D can work with a DMX controller when linked by
DMX serial connections. Instructions for connecting and configuring this
product for DMX operation are in the User Manual. If you are not familiar
with DMX, download the DMX Primer from www.chauvetlighting.com.
The Hurricane Haze 1D uses a single channel in its 1-channel DMX mode,
which defines the highest configurable address to 512.
The Hurricane Haze 1D can be operated manually, or with the included
wired remote control. Details can be found in the User Manual, available at
www.chauvetlighting.com.
Important: Using the Digital Display, set the Haze output to 0. You can
then connect and operate the remote with the Hurricane Haze 1D.
A DMX controller will take priority control over the digital display and
Remote Control. The priority control levels are:
1. DMX
2. Remote Control
3. Digital Display
Programming Steps
h 0~h 3
H _ _ _
d 1~512
Function
Output
Output Low~High
Shows current temperature
Selects the DMX starting address
Value
000 ó 255 Low~High
5
Function
Description
Percent/Setting
EN