Power Supply - Bresser Temeo io Bedienungsanleitung

When changing batteries always change batteries in the
main unit as well as all remote units and replace them
in the correct order, so the remote connection can be
re-established. If batteries are exchanged in only one of
the devices (i.e. the remote sensor) the signal can't be
received or can't be received correctly.
Note, that the effective range is vastly affected by
building materials and position of the main and remote
units. Due to external influences (various RC devices
and other sources of interference), the maximum
distance can be greatly reduced. In such cases we
suggest to position the main unit and the remote sensor
at other places. Sometimes all it takes is a relocation of
one of these components of a few inches!
Though the remote unit is weather proof, it should be
placed away from direct sunlight, rain or snow.

POWER SUPPLY

Remote sensor
1. Open the battery compartment door.
2. Install 2 batteries (AAA size 1.5V) strictly according to
the polarities shown.
3. Reinsert the battery compartment door.
Main unit
1. Open the battery compartment door.
2. Install 2 batteries (AAA size 1.5V) strictly according to
the polarities shown.
3. Reinsert the battery compartment door.
18