Installation - Daikin Europe OM-SLM9-0312(0)-SIESTA Bedienungsanleitung

2.0 HARDWARE SETTING
The unit has 2 jumpers option to control the board function.
Table 2.0: Summary of Hardware Settings
OPTION
Set Temp. Range
TURBO_QUIET
* Only applicable to model with built in Turbo or Quiet features.
3.0

INSTALLATION

3.1 Accessories
The following accessories are included together with this manual. If any part is missing, contact your
dealer immediately.
1. Remote controller
2. Wooden screw (2 pieces) & machine screw (2 pieces)
3. Instruction manual
4. Battery
3.2 Step-by-step guide
I. Open the clip on the top of the controller first follow by the bottom clip. Remove the top case of
the controller from the bottom case.
II. Fix the bottom case to the wall with the 2 screw provided. Then insert the connection wire through
the slot on the upper center case as shown.
III. Insert back the bottom clip first then snap the upper part shut.
M O D
E
T U R
B O
S W IN
G
D E L A
Y
T IM E
R
T IM E
R
T IM E
R
F A N
With Jumper
Set temp. range from 20°C – 30°C
Disable turbo and quiet fan speed
(Default)
LCD Remote
(Top case)
Q U IE
T
O N /
O F F
2 x Wooden
screw
Set temp. range from 16°C – 30°C
Enable turbo and quiet fan speed
LCD Remote
(Bottom case)
6
Without Jumper
(Default)
Connection
wires