Operation; Battery/Charger; Transport; Storage - Kärcher LB 850 Bp Originalbetriebsanleitung

Operation

 Press the release button.
 Push the power switch, device starts.
 Release the power switch, device
stops.
WARNING
Risk of injury on account of after-running
blower. Wait until the blower is at a com-
plete standstill.
1 Output regulator
2 Button boost function (turbo)
Output regulator
The blower performance can be continu-
ously adjusted via the output regulator.
 To increase the blower performance,
turn the output regulator to the left.
 To reduce the blower performance, turn
the output regulator to the right.
Button boost function (turbo)
The boost function temporarily increases
the speed of the blower and thus the blower
performance to a maximum.
 Push the button to increase the speed.
 Release the button to continue work
with normal speed.
NOTICE
The button can be permanently pushed,
but then the run time with one battery
charge reduces significantly.
Shutting down
 Turn off the appliance.
 Remove the battery from the device.
 If necessary, remove blower pipe for

transport.

14

Battery/charger

Read and comply with the operating in-
structions 5.966-814.0 and 5.966-815.0 for
handling the battery and the charger.
CAUTION
Risk of personal injury or damage! Mind the
weight of the appliance during transport.
Only transport the device when the battery
pack has been removed.
CAUTION
Risk of personal injury or damage! Consid-
er the weight of the appliance when storing
it.
This appliance must only be stored in inte-
rior rooms.

Care and maintenance

You can sign with your dealer a contract for
regular safety inspection or even sign a
maintenance contract. Please take advice
on this matter.
Only approved original spare parts and
original accessories may be used in order
not to impair the safety of the device.
The warranty terms published by our com-
petent sales company are applicable in
each country. We will repair potential fail-
ures of the appliance within the warranty
period free of charge, provided that such
failure is caused by faulty material or de-
fects in fabrication.
– 5
EN
Transport

Storage

Warranty