Seite 1
IN221100507V01_GL 801-315V80 " IT_I LEGGERLO ATTENTAMENTE.
Seite 3
BOX 1-2 BOX 2-2 PARTNO PARTS PARTNO PARTS...
Seite 7
M6*35 M6*30 +1(spare) M3.5 *12 +1(spare) 1(spare ) +1(spare) M6*50 M3*14 +1(spare) +1(spare) +1(spare) M5*45 M4*16 +1(spare) +1(spare) M4*30 M5*16 +1(spare) +1(spare) M4*14 +2(spare) NOTE EN_Do not confuse similar screws.Do not tighten bolts fully until all parts are connected! FR_Ne pas confondre des vis similaires.Ne serrez pas les boulons à fond tant que toutes les pièces ne sont pas connectées! ES_No confunda tornillos similares.No apriete los tornillos completamente hasta que todas las partes están conectadas!
Seite 8
A x 6 CR x 2 CL x 2 D x 12 EN_Please find the exact hole for installation, otherwise it will be misaligned.The screws on the drawer slide must be leveled , otherwise it will affect the smoothness of the d rawer. FR_Identifiez le trou exact pour l'installation, sinon il sera mal aligné.
Seite 13
EN_The buckles have 3 optional adjustment FR_Les boucles ont 3 positions d'ajustement possibles O x 4 ES_Hay 3 posiciones opcionales para ajustar las hebillas. PT_As fivelas têm 3 ajustamento opcional. DE_Die Steckverschlüsse haben 3 wahlweise Verstellmöglichkeiten IT_Le presentano 3 livelli di regolazione opzionali J x 6 S x 3 P x 6...
Seite 16
J x 2 T x 2 A x 8 DLx 2 DR x 2 B x 8 N x 8 D x 12 EN_Please find the exact hole for installation, otherwise it will be misaligned.The screws on the drawer slide must be leveled , otherwise it will affect the smoothness of the d rawer. FR_Identifiez le trou exact pour l'installation, sinon il sera mal aligné.
Seite 17
EN_Be careful to push in the board when the both sides slide way been aligned. FR_Prenez soin d'enfoncer la planche lorsque les deux côtés de la glissière sont alignés. ES_Empuje con cuidado el tablero después de que los dos lados se hayan alineado. PT_Ter o cuidado de empurrar a placa quando os dois lados estiverem alinhados.