Herunterladen Diese Seite drucken
IN250700526V01_GL
83A-389V00
12
STEPS
60MIN
EN_IMPORTANT, RETAIN FOR FUTURE REFERENCE: READ CAREFULLY.
FR_IMPORTANT: A LIRE ATTENTIVEMENT ET A CONSERVER POUR VOUS Y REFRERER
ULTERIEUREMENT
ES_IMPORTANTE, LEA DETENIDAMENTE Y GUARDE PARA FUTURAS REFERENCIAS.
PT_IMPORTANTE, GUARDE PARA FUTURA REFERÊNCIA, LEIA ATENTAMENTE.
DE_WICHTIG! SORFGFÄLTIG LESEN UND FÜR SPÄTERES NACHSCHLAGEN AUFBEWAHREN.
IT_IMPORTANTE, LEGGERE E CONSERVARE QUESTO MANUALE D'ISTRUZIONE PER UN USO
FUTURO.
loading

Inhaltszusammenfassung für HOMCOM 83A-389V00

  • Seite 1 IN250700526V01_GL 83A-389V00 STEPS 60MIN EN_IMPORTANT, RETAIN FOR FUTURE REFERENCE: READ CAREFULLY. FR_IMPORTANT: A LIRE ATTENTIVEMENT ET A CONSERVER POUR VOUS Y REFRERER ULTERIEUREMENT ES_IMPORTANTE, LEA DETENIDAMENTE Y GUARDE PARA FUTURAS REFERENCIAS. PT_IMPORTANTE, GUARDE PARA FUTURA REFERÊNCIA, LEIA ATENTAMENTE. DE_WICHTIG! SORFGFÄLTIG LESEN UND FÜR SPÄTERES NACHSCHLAGEN AUFBEWAHREN.
  • Seite 2 Operation Instructions Please confirm that all components are present before beginning assembly. For the protection of your furniture, place all parts on a clean and smooth surface to prevent any damage. Please assemble the furniture by 2 persons or more. Do not confuse similar screws.
  • Seite 3 BOX 1-2 ① ② ⑦ 20x40x650mm 10x20x693mm 25x50x1200mm ⑧ ⑨ ⑩ 25x50x720mm 20x40x650mm 25x50x720mm Hardware Kit 550x15x2.0mm BOX 2-2 ③ ④ ⑤ 700x800x20mm 640x70x20mm 800x400x20mm ⑥ 700x800x20mm...
  • Seite 4 M6*16 M6*70 M8*16 +2 (spare) +1 (spare) +2 (spare) M6*16 M6*14 M8*16 +1 (spare) +1 (spare) M4*16 +1 (spare)
  • Seite 5 M6*16 TIMES M8*16 TIMES...
  • Seite 6 M8*16 M8*16 EN: Do not tighten bolts fully until all parts are connected! FR: Ne serrez pas les boulons à fond tant que toutes les pièces ne sont pas connectées! ES: No apriete los tornillos completamente hasta que todas las partes están conectadas! PT: Não aperte os parafusos completamente até...
  • Seite 7 M4*16 If the tabletops are not level, you can adjust this part G up or down to make them level. Si les plateaux ne sont pas de niveau, ajustez la partie G vers le haut ou le bas pour les niveler. Si las superficies de la mesa no están niveladas, ajuste la pieza G hacia arriba o hacia abajo para nivelarlas.
  • Seite 8 M6*16 M6*16...
  • Seite 9 M6*16 M6*16...