Interra ITR830-0011 Bedienungsanleitung

Demirdokum VRF
AC - KNX Gateway
Product Code ITR830-0011
Power Supply KNX Power Supply
Power Consumption 5 mA
Push Buttons 1 x KNX Programming Button
LED Indicators 1 x KNX Programming LED
Type of Protection IP 20
Mode of Commissioning S-Mode
Maximum Air Humidity < 90 RH
Operation (-10°C...70°C)
Temperature Range
Storage
Colour Light Grey
Dimensions 88 x 62 x 27 mm (W x H x D)
Configuration Configuration with ETS
© 2024 INTERRA
DESCRIPTION
ITR830-0011 is an air conditioner gateway used for monitoring and
controlling all the functioning parameters of Demirdokum air condition-
ers via the KNX bus line. Demirdokum VRF AC - KNX Gateway is
compatible with models in VRF types categorized on the compatibility
list published by Interra.
Demirdokum VRF AC - KNX Gateway has an easy installation feature
and can be installed inside the own AC indoor unit or a proper location
away from the air conditioner, it connects one side directly to the
electronic circuit of the AC indoor unit and in the other side directly to
the KNX bus.
Note: Existing commands may vary according to indoor unit model.
Please refer to relevant technical documents.
DIMENSIONS & CONNECTION DIAGRAM
• All values given in the device dimensions are millimetres.
(-25°C...100°C)
FUNCTIONS
•
•
•
•
•
1/15
ITR830-0011 device provides complete bi-directional integration of
VRF type air conditioners with KNX bus.
Includes 4 logical advanced parameters, each logical parameter have
up to 4 inputs and can be configured as AND, OR & XOR.
Includes 8 advanced converter parameters, each converter has four
operations math calculations according to input type.
Logic and converter parameters can be used for energy savings,
configurable scenes, temperature limits etc.
The Demirdokum air conditioner unit provides error notifications for
errors that may occur in exceptional cases.
1

AC Indoor Unit Connection

KNX Programming Button

KNX Programming LED

KNX Connector
4
3
2
DS2405090107E