Lcd Display; Menu Navigation - Ryf Ag Rlq 2600 Led Bedienungsanleitung

3.5 LCD DISPLAY

Menu navigation for RLQ 1100 LED, functions are also applicable to RLQ 2600 LED.
3.5.1

MENU NAVIGATION

RLQ 1100
Intens : 50%
RLQ 1100
Intens : 33%
*** MENU ***
SET M1
*** MENU ***
SET M2
*** MENU ***
<SET M2
*** MENU ***
DimSteps
*** MENU ***
<DimSteps:1%
*** MENU ***
Reset all
Reset all?
<
Reset all?
<
*** MENU ***
FW-Info
Firmware
Ver.: X.XXX
Serialnumber
*** MENU ***
< Exit Menu
22
der (2) to access the menu.
>
be set in the 6 memory locations Set M1 to Set M6 by rotating the incremental encoder (2).
>
5
By rotating the incremantal encoder (2) you get to the menu item "DimSteps". Pre-setting of „DimSteps" is 2.
>
.
Rotate the incremental encoder (2) in the menu to access the menu item 'Reset all'.
>
device can be re-instated. The display shows the question 'Reset all?'. Rotate the incremental
NO
the selection.
YES
By rotating the incremantal encoder (2) you get to the menu item „FW-Info" .
>
Ver. xxx) and serialnumber of the device.
mental encoder (2) to exit the menu and revert to normal operation mode.
OPERATION
-
-