Product Drawing; Installation Instruction - Jet-Line Group Elektra Bedienungsanleitung

PRODUCT DRAWING

INSTALLATION INSTRUCTION

• The heater needs to be installed by a qualified electrician.
• Install the heater on a firm and even surface on the ceiling and make sure
the mounting base is stable enough to hold its weight (such as a wooden
beam, metal rail etc.).
• The hook on the ceiling holding the patio heater must be capable to hold a
weight of minimum 3 or 4 times the heaters actual tare weight.
• Put the hook A into the ceiling hook and clip it into any ring of the chain to
adjust the heater to the requested height from the floor.
• The minimum distance between ground and heater is 180 cm.
• Plug your patio heater into a grounded 220-240V 50 Hz 15A power outlet.
• Only operate the heater when it is in an upright position.
Remote Control
16