Charging Your Io Hawk - IO HAWK TRAX Benutzerhandbuch

●
Do not attempt to modify, change, or replace your battery.
●
Do not use your IO HAWK if the battery begins to emit odor,
overheats, or begins to leak.
●
Do not touch any leaking materials, or breathe fumes emitted.
●
Do not allow children and animals to touch the battery.
●
The battery contains dangerous substances, do not open the
battery, or insert anything into the battery.
●
Please only use the charger provided by IO HAWK.
●
Do not attempt to charge the IO HAWK if the battery has
discharged or emitted any substances. In that case, the
battery should be abandoned for safety.
●
Please follow all local, state and federal laws in regards to
recycling, handling and disposing of Lithium Ion batteries.
●
The IO HAWK should only be shipped in its original
packaging.
●
Do not throw away your box as you need you IO HAWK
packaging for future use.

9. Charging your IO HAWK

Step 1: Ensure that the charging port is clean and dry. Make sure that
there is no dust, debris or dirt inside the charging port.
Step 2: Plug the charger into the wall, then connect the cable with the
power supply (100V ~ 240V; 50, 60 Hz), make sure the light on the
charger is lit GREEN.
Step 3: Connect the charging cable into the charging port of the
IO HAWK. The indicator light on the charger should change to RED,
indicating that your IO HAWK is now being charged. When the RED
indicator light on your charger turns to GREEN, then your IO HAWK is
fully charged. A full charge typically occurs within 2-3 hours.
Step 4: Please unplug the charger from your IO HAWK and from the
power outlet.
Important Notes About Charging
16