Nanoxia RGB Bedienungsanleitung Seite 8

®
N ANOXIA
Thank you for choosing a NANOXIA product!
In order to install a VGA-card or other components first carefully
take off both side-panel by lockering the screw at the rear of the
case and then shift the side-panel to the rear. (1)
Install
Take off the PSU-install-shield at the rear oft he case and fix it to the PSU. (2)
Now insert the PSU-Shield with power supply unit from the rear into the case at the bottom with
power Button outside to the rear (3) and fix it with screws. (4)
e. Install
Please check if your motherboard
If so, please use the nut setter to install the standoffs at the right places.
Secure the motherboard
3. Install
Take out the 3.5"HDD tray from the cage. (5)
Install the 3,5" drive onto the tool-less tray and secure it. (6)
NANOXIA:
Power supply
Motherboard
requires more standoffs than the preinstalled ones.
down onto the pre-installed standoffs with.
3,5"
TURN ON
WWW.NANOXIA.COM
NAN X
- GERMAN ENGINEERING
A
O