Inakustik 00415004 Bedienungsanleitung Seite 8

OPER ATION MANUAL PREMIUM PHONO PRE AMP
2) DIGITALIZE RECORDS
Follow the following description to grab music on phonograph disk.
A. Connect the stereo audio cable (optional) with phonograph turntable player & USB preamplifier.
B. To prevent hum and noise recommended the drive of the turntable is to be joined by his ground wire
to the ground screw of the phono preamplifier.
C. Connect the USB cable with PC (or notebook) and the USB Pre-Amp as the illustration below.
D. When the USB connection is ok, the PC will auto-detect this unit as "USB PREAMP".
OPERATION
A. Play the phonograph
B. Select the MM/MC position for different
type of pickup head of turntable
C. Now you can start working with your audio
grabbing program on PC /notebook
3) PHONO PREAMPLIFIER (STAND ALONE OR OPERATED WITH PC AT THE
SAME TIME)
A. Connect the stereo audio cable to turntable player and USB Pre-Amp.
B. To prevent hum and noise it`s recommended the drive of the turntable is to be joined by his ground
wire to the ground screw of the phono preamplifier.
C. Get the USB -> mini USB cable, and then connect with your power supply and the Pre-Amp.
D. Connect 3.5mm -> RCA audio cable, and then connect the "Pre-Amp Out" port and
the RCA end to your stereo amplifier.
8