Device Description; Getting Started; Operation - Beurer BY 52 Gebrauchsanweisung

5. Device description

Overview
1 Lifter
2 Lid
3 Mains cable
4 MIN/MAX display
5 Control panel
6 Power LED
7 Heat LED
8 Time/Temperature display
9 Button for setting time and/or
temperature
10 On/Off button
11 Rapid heat-up button

6. Getting started

1. Before use, ensure that the device and accessories (including mains cable) do not have any visible damage.
2. Place the device on a fi rm, even surface.
3. Connect the mains plug to the socket. The power LED lights up. The device is ready for use.

7. Operation

Warming up baby food/drinks and keeping them warm:
1. Place the lifter in the baby food warmer and place the bottle or jar in the lifter.
2. Fill the container with suffi cient water depending on the size of the jar. Ensure that the water does not overfl ow.
Starting the warming process:
1. Press button followed by the rapid heat-up button
The warming time that is currently set now fl ashes on the display. On fi rst use, the default setting of 15 mi-
nutes is displayed. If the device remains plugged in after the fi rst use, it shows the last entered warming time
when subsequently used.
2. Enter the warming time (3 - 18 minutes). To do so, press the
desired warming time. The time is entered in minute increments; after "18", the display begins again at "3".
The warming time is dependent on the initial temperature, the type and quantity of food/drink, the
container material (glass/plastic) and the temperature of the water used to fi ll the device. The follow-
ing table off ers a guide to selecting the warming time for food/drinks to be warmed to 37°C.
100 ml milk/chilled
250 ml milk/chilled
190 g puréed food/room temperature
1
2
3
8
9
10
11
.
button repeatedly until you have reached the
Duration
~ 8 min.
~ 14 min.
~ 8 min.
10
4
5
6
7