FC-8 >Hardware Wichtiger Hinweis: Important information: Fohhn Audio DSP >Display Handling< (see separate user instruction!) Fohhn Audio Soft >Software Handling< (see separate user instruction!) Bitte lesen Sie vor Inbetriebnahme des Gerätes die Bedienungsanleitung sorgfältig durch und bewahren Sie sie auf.
Führen Sie am Gerät keinen Service durch, der über die Instandhaltung hinausgeht. Weiteren Service überlassen Sie unbedingt qualifiziertem Servicepersonal. • Bewahren Sie die Verpackung der Geräte auf, damit Sie sie im Schadensfalle, originalverpackt verschicken können. So wird das Risiko eines Transportschadens minimiert. 2 | FC-8 Controller...
4. Reinigung Das Gerät entspricht den derzeit gültigen Normen des EMV- Gesetzes. Dies wird durch das am Gerät angebrachte CE-Zeichen Das Gehäuse des FC-8 können Sie mit einem feuchten Tuch bescheinigt. abstauben. Die Oberfläche der Decorplatte aus hochwertigem Aluminium reinigen Sie am besten mit einem (Industrie-)Spiritus Das Gerät enthält keine vom Anwender reparierbaren Teile.
Optimale Betriebssicherheit und ausgewogenes Klangverhalten bei allen Lautstärkebereichen. In einer Lautsprecher-Datenbank sind für alle Fohhn Lautsprechertypen die Daten hinterlegt. Der FC-8 – DSP-System Controller (4 in / 6 out). angewählte Lautsprecher wird durch selektives Multibandlimiting für Bass, Mittelton- und Hochtonbereich bestens geschützt. Hierbei Optimaler Schutz für Endstufen und Lautsprecher dank...
Seite 6
FR-40 Fohhn-Net Remote Endstufe. 19”-Netzwerkverteiler für mobile Beschallungen. netzwerkfähig / fernsteuerbar mit dem neuen NA-1 Fohhn-Net USB Adapter netzwerkfähig / fernsteuerbar mit dem neuen NA-2 Fohhn-Net WLAN Adapter Die Fohhn Audio Soft Bediensoftware. Version 2.4.x erforderlich. 6 | FC-8 Controller...
Mit dem Power-Schalter wird der FC-8 eingeschaltet. Eingangspegel >+3dB (1VRMS=0dB) (Position I) Eingangspegel > 0dB (1VRMS=0dB) In Position 0 ist der FC-8 komplett vom 230V Netz getrennt. Eingangspegel >-20dB (1VRMS=0dB) Eingangspegel >-50dB (1VRMS=0dB) Nach dem Einschalten durchläuft der FC-8 einen Selbsttest.
Seite 9
Durch Drücken des Drehreglers (20) ergeben sich Kontext bezogene weitere Funktionen. (29) send LED LED zeigt an, wenn Daten vom FC-8 gesendet werden. (22) Navigationstasten (23) Mit den Up (24) / Down (25) Tastern kann man sich eine Zeile (24) nach oben oder unten bewegen.
Durch gleichzeitiges Drücken der Taste „select mute“ (34)und einer der sechs Ausgangskanaltasten (36) können Sie den jeweiligen Der FC-8 springt immer an die Stelle an der Sie zuletzt in dem Ausgangskanal muten bzw. wieder aktivieren. Leuchtet eine Mute- jeweiligen Kanal gearbeitet haben.
Daten der Endstufe (Verstärkung, maximale Ausgangsspannung) an der Verstärkern angeschlossenen sind! dem FC-8 bekannt sein. Der FC-8 bietet Ihnen die Möglichkeit bis zu 100 Endstufen mit Vorbereitungen ihren Daten abzuspeichern, und bei Bedarf wieder abzurufen. Die entsprechenden Leistungsdaten können automatisch vom FC-8 1.
Gehäuse ist verwindungsfest ausgeführt. Bitte tragen Sie Halten Sie den Handsender stets nur am Schaft. Achten Sie auch Sorge, daß der FC-8 während des Betriebs von vorne darauf, den Mikrofonkopf nicht mit der Hand abzudecken. und von hinten ausreichend belüftet und gekühlt wird.
XSP-3 + XT-33 ASP-30 + XT-33 Top 8-1 200W universal Top 10-1 300W Top 12-1 400W Top 12-2 450W Top 15-2 500W Diese Geräte entsprechen den Normen EN 61000-6-1, EN 61000-6-3 und EN 60065 Technische Änderungen vorbehalten! 14 | FC-8 Controller...
• Retain any original packaging in case the unit is damaged and needs to be sent for repair. This will minimise the risk of damage during transportation. FC-8 Controller | 15...
Seite 16
....30 Special FC-8 features in Fohhn Audio Soft. German user instructions / Bedienungsanleitung ....1 Important information: Fohhn Audio DSP >Display Handling<...
Your FC-8 DSP controller comprises the following components: With these high demands in mind, we have developed and 1x FC-8 DSP system controller consistently implemented the digital FC-8 to help run your events 1x IEC-cable with Powercon connector or installation with as little effort as possible.
DSP-2: Speaker Management System. Specifications for all types of Fohhn speakers are stored in a speaker FC-8 DSP system controller (4 in / 6 out). database. An algorithm especially developed by Fohhn guarantees a...
Seite 19
19” network distributor for mobile sound applications. networkable / remote control with the new NA-1 Fohhn-Net USB adapter networkable / remote control with the new NA-2 Fohhn-Net WLAN adapter The Fohhn Audio Soft user software. Version 2.4.x necessary. FC-8 Controller | 19...
Input level > 0dB (1VRMS=0dB) 230V power supply. Input level >-20dB (1VRMS=0dB) Input level >-50dB (1VRMS=0dB) The FC-8 carries out a self test when switched on. All LEDs light not connected up during the test. Mute indicator lights up when the input is deactivated The FC-8 is then ready for operation.
Seite 22
Display Clearly laid out 4-line display. All information and settings (26) Fohhn-Net Remote connection sockets relating to the Fohhn Audio DSPs can be viewed on this (27) display. The network cables are connected to the IN (26) Important: Display lock protects against unauthorised front and rear and OUT (27) sockets.
If you subsequently adjust the settings of one of the linked channels on the display (21), these settings are adopted by all Each of the 6 output channels on the FC-8 can be labelled linked channels. This applies for all DSP parameters, except for according to its function.
Preparations The FC-8 gives you the option of storing the data of up to 100 amplifiers and then retrieving this data again when required. The 1. Disconnect all speakers from the amplifier! FC-8 can automatically calculate the corresponding performance 2.
If dew forms on the unit during transportation or storage, allow the unit to acclimatise for approx. 2 hours before use. The FC-8 should be operated in a dry environment with normal dust and moisture levels in the air. Do not expose the unit to aggressive chemical liquids or vapours.
8 and always switch off the FC-8 before disconnecting it from the mains power supply. All other cables should be connected when the FC-8 is switched off and the mixing desk should be switched on before the FC-8 is switched on. This prevents annoying and often dangerous switch-on noises.
Top 8-1 200W universal Top 10-1 300W Top 12-1 400W Top 12-2 450W Top 15-2 500W This equipment conforms to standards EN 61000-6-1, EN 61000-6-3 and EN 60065 We reserve the right to alter the specifications without notice. FC-8 Controller | 27...
10. FC-8 Menüstruktur / FC-8 menu structure Die folgende Auflistung gibt Ihnen eine schnelle Übersicht über den Aufbau des Menues: The following listing gives you a fast overview about the menu structure: 2.1.8 Setup 1. Presets 2.1.8.1 Load speaker 1.1 Load Preset 2.1.8.1.1 Ch1 speaker...
Kanäle miteinander verlinkt werden. The “Control field“ displays the volume controllers for all 6 output The 6 output channels of the FC-8 are located in the EQ, Dynamic, channels on the FC-8. Adjacent channels can be linked with one Delay, X-Over and Generator modules.
Seite 31
Die Fohhn Audio Soft für den FC-8 / The Fohhn Audio Soft for FC-8 FC-8 Controller | 31...
Seite 32
Sie haben eine gute Wahl getroffen und We believe you have made the right wir sind überzeugt, dass Ihnen Ihr Fohhn- choice and we are sure that your Fohhn Lautsprechersystem viel Freude bereitet loudspeaker system will give you many und gute Dienste leisten wird.