Robust RB-CD 10,8 Litio Originalbetriebsanleitung Seite 16

Anleitung_RB_CD_10_8_Litio_SPK7__ 31.07.12 07:18 Seite 16
GB
of 10-20°C. Protect them from humidity and direct
sunlight. Only place fully charged batteries in
storage (charged at least 40%).
8. Prevent the lithium-ion battery pack from freezing.
Battery packs which were stored below 0°C for
more than 60 minutes must be disposed of.
9. When handling batteries beware of electrostatic
charge: Electrostatic discharges cause damage
of the electronic protection system and the
battery cells. Avoid electrostatic charging and
never touch the battery poles.
When shipping or disposing of batteries and
cordless tools, always ensure that they are
packed individually in plastic bags to prevent
short circuits and fires.
Do not lose this safety information.
2. Layout and items supplied (Figure 1)
2.1 Layout
1. Torque selector
2. Quick-change drill chuck
3. Changeover switch
4. ON/OFF switch
5. Battery pack
6. Battery charger
7. Charging cable
8. Pushlock button
9. LED lamp
10. Battery capacity indicator
2.2 Items supplied
Open the packaging and take out the equipment
n
with care.
Remove the packaging material and any
n
packaging and/or transportation braces (if
available).
Check to see if all items are supplied.
n
Inspect the equipment and accessories for
n
transport damage.
If possible, please keep the packaging until the
n
end of the guarantee period.
IMPORTANT
The equipment and packaging material are not
toys. Do not let children play with plastic bags,
foils or small parts. There is a danger of
swallowing or suffocating!
Cordless drill/screwdriver
n
Battery charger
n
Original operating instructions
n
16
3. Proper use
The cordless drill/screwdriver is designed for
tightening and undoing screws, as well as for drilling
in wood, metal and plastic.
The machine is to be used only for its prescribed
purpose. Any other use is deemed to be a case of
misuse. The user / operator and not the
manufacturer will be liable for any damage or injuries
of any kind caused as a result of this.
Please note that our equipment has not been
designed for use in commercial, trade or industrial
applications. Our warranty will be voided if the
machine is used in commercial, trade or industrial
businesses or for equivalent purposes.
4. Technical data
Voltage supply 10.8 V d.c.
Idling speed: 0-600 rpm
Torque settings:
Forward and reverse rotation
Chuck clamping width max. 10 mm
Battery charging voltage 12 V d.c.
Battery charging current
Mains voltage for charger 230 V ~ 50 Hz
Charging time: max. 3-5 hours
Battery type:
Weight
Screw diameter:
Sound and vibration
Sound and vibration values were measured in
accordance with EN 60745.
L sound pressure level 70.6 dB(A)
pA
K uncertainty
pA
L sound power level 81.6 dB(A)
WA
K uncertainty
WA
Wear ear-muffs.
The impact of noise can cause damage to hearing.
15+1
yes
0.5 A
Li-Ion
1.2 kg
6 mm
3 dB
3 dB