Alternative Pin Config - Jeti Duplex Rex3 Benutzerhandbuch

EN
COMPUTER RADIO CONTROL SYSTEM
becomes lower than the threshold level, the transmitter emits an
acoustical warning tone.

7.2 Alternative Pin Config

Output settings E1, E2, E3:
EX-Bus - digital communication for transmission of servos
deviations, telemetry and configuration data. This setting is
suitable, for example, for connection to a Central Box or a device
that supports EX-Bus.
S.BUS - digital communication for transmission of servos
deviations. This setting is suitable, for example, for connecting to a
device that supports S.BUS.
UDI 12 - serial data output suitable for connection of devices with
unidirectional UDI interface (12 channels).
UDI 16 - serial data output suitable for connection of devices with
unidirectional UDI interface (16 channels).
Output settings Ext. : This pin is used to pair the receiver by a
jumper (bind plug).
22