lmp ProtectCase Schnellstartanleitung
Verfügbare Sprachen
Verfügbare Sprachen
LMP Keyboard ProtectCase for iPad 10.2''
Quick Start Guide
EN
Bluetooth pairing
Multifunctional Keys
Home
Brightness +
iPad keyboard
screen
Brightness -
Search
Change language
LED Status Indicators
Caps Lock
Light on means uppercase letters; light off means lowercase
indicator:
letters
Wireless
Press „Fn+C" to perform the pairing between iPad and keboard.
status:
The LED will turn off when the connection to the iPad has been
sucessfully established.
Battery
A flashing light indicates a low battery level. Constant light me-
status:
ans charging. Green light means fully charged.
lmp ProtectCase / 20730
Battery status LED
Wireless status LED
Caps status LED
Previous song
Next song
Volume -
Play/pause
Mute
Keyboard Pairing
1)
Switch on the iPad, then pair the Bluetooth keyboard.
2)
Move the on/off switch to the ON position, then press „Fn+C" to
perform the pairing. The LED will turn off when the connection to the
iPad has been successfully established. If the connection has not
been established within 3 minutes you need to repeat the pairing
process from the start.
3)
Select „Settings" => „Bluetooth". Make sure that Bluetooth is turned
on.
4)
Select under „OTHER DEVICES" the „LMP BT Keyboard".
5)
A 4-digit numeric code is displayed on the screen. Type in the num-
bers on the keyboard and press „Enter" on the keyboard to confirm.
6)
The pairing has been successful when „LMP BT Keyboard" is listed
under „MY DEVICES" in the Bluetooth settings.
7)
In case the pairing has failed, repeat the pairing process from 2.
Connection Problems
1)
Make sure the keyboard is turned on and the battery is charged.
2)
Make sure the keyboard is close to the iPad.
3)
Make sure that Bluetooth is enabled on the iPad.
4)
Make sure the keyboard has been paired with the iPad.
Maintenance
1)
Keep the keyboard away from liquids and magnetic fields.
2)
Use a soft cloth to clean the keyboard.
Lock-
3)
When not in use, switch off the keyboard.
screen
Volume +
Mounting the Stand
1) Pull the magnetic flap
backwards. Push the center
of the stand outwards.
2) Put the magnetic flap over
3) The stand is now firmly
the stand holder.
locked.
LMP v2.2, 2/2020
Inhaltszusammenfassung für lmp ProtectCase
- Seite 1 A 4-digit numeric code is displayed on the screen. Type in the num- bers on the keyboard and press „Enter“ on the keyboard to confirm. The pairing has been successful when „LMP BT Keyboard“ is listed under „MY DEVICES“ in the Bluetooth settings.
- Seite 2 Wählen Sie “Einstellungen” => “Bluetooth”. Stellen Sie sicher, dass Bluetooth eingeschaltet ist. Wählen Sie unter “ANDERE GERÄTE” das “LMP BT Keyboard” aus. Ein 4-stelliger Zahlencode wird auf dem Bildschirm angezeigt. Tippen Sie die Zahlen ein und bestätigen Sie den Code mit der “Enter”-Taste auf der Tastatur.
- Seite 3 Sullo schermo viene visualizzato un codice numerico a 4 eifre. Digi- tare i numeri e confermare il codice con il tasto “Enter” sulla tastiera. L’accoppiamento ha successo non appena la tastiera “LMP BT Key- board” viene visualizzata come “Connected” sotto “MY DEVICES”.