4 . Before First Use
D ANGER
Riskofsuffocation!
» Keep any packaging materials away from children and
pets – these materials are a potential source of danger, e.g.
suffocation.
5 . Product Description
L
Status indicator
K
CD/DVD feed slot
J
Paper/card
feed slot
I
Bin
H
Window
6 . Placement and Setup
Push the bolts of the casters (F and G) into the bolt holes
securely on the bottom of the product.
Install the casters with brake (G) to the front;
NOTICE
install the casters without brake (F) to the rear.
G
x2
» Remove all the packing materials.
» Check the product for transport damages.
» Before connecting the product to the power supply,
check that the power supply voltage and current rating
corresponds with the power supply details shown on the
product rating label.
A
Control panel
NOTICE
product and any walls for sufficient ventilation.
F
x2
1. Move the product to the desired position. Engage the brakes
on the casters to avoid unintended rolling.
2. Connect the power plug (D) to a suitable socket-outlet.
3. Check that the bin (I) is properly closed. The product works
only when the bin is closed properly.
B
Ventilation opening
On/off switch (I/O)
C
Power cord
D
with plug
Carrying handle
E
(on both sides)
Caster without brake, x2
F
(rear casters)
Caster with brake, x2
G
(front casters)
*Casters (
F
and
) are delivered separately.
G
Keep a minimum distance of 5 cm between the
5 cm
Product
EN
Wall
3