Boompods echobuds Kurzanleitung

echobuds
The recycled material used to make this product may
have traces of the wide mix of types of plastics
collected, this can allow some minor black spots and
imperfections to appear upon the surface. These are
normal and do not affect the performance of the
product.
For First-Time Use:
1. Open the charging case. 2. Remove the earbuds.
2. The buds will automatically pair together and enter
the pairing stage.
3. Turn on Bluetooth on your pairing device (phone).
4. Select "ECHOBUDS" from the list of available devices.
6. Wait for the connected confirmation.
Note: After you have completed these steps, the
earbuds will automatically connect to your device the
next time. In pairing mode If not connected after 10
mins earbuds will power down.
ECHOBUDS
x
In the unlikely case of any pairing problem 1.
Remove from phone bluetooth menu. 2. Press 6
times both earbuds at the same time. 3. now
re-pair to your phone like for the fist time.
Product Name: ECHOBUDS Input:
DC 5V = 70mA fast charge
Material: R-ABS
Charging case input: DCSV = 1A
Bluetooth version: V5.3
Charging time: 1.5h
Noise reduction: ENC
Frequency response range: 20Hz-- 20KHz
Communication distance: 10m
Charging interface: Type-C
Standby time: about 350h
Product weight: 28.28
Playing time: about 6 h volume (60%)
Earbud battery: 30mAh/ 3.7V
Total playback time: 19 ~ 22h
Charging case battery: 250 mAh / 3.7V
Product size: 5.9*4.37*2.38 (cm)
The Declaration of Conformity can be found at:
https://www.boompods.com/product/echobuds Hereby, Boompods
declares that the radio equipment type [Earphone with Bluetooth] is
in compliance with Directive 2014/53/EU. FCC ID: RDR-BH20T13A
LED
Blinking green LED case needs charging.
use provided USBC charging cable.