conform SKN4040 Bedienungsanleitung

Product Information
C ® Med. Air Cushions are made of natural rubber. Natural
ONFORM
Rubber is a renewable resource which requires only low energy
expenditure processes for its treatment. C
ONFORM
biodegradable and require no special disposal measure.
Only the purest rubber (24-015 NR green) is used for the production
of C products. This particular quality is free of allergens and
®
ONFORM
fulfils all current demands for a medical product.
C ® cushions are available in 3 different heights (5, 7.5 and 10
ONFORM
cm) and a wide range of sizes. Our cushions offer the very highest
seating comfort, limiting the danger of pressure sores, and can be
used therapeutically with existing skin problems. The high elasticity
results in pressure relief - allowing the blood flow in the capillaries.
The cushions are used from stage of prophylaxis up to pressure ulcer
(Grade IV).
There are no usage restrictions either in terms of the material or the
cushion form. The choice of 2- or 4-valve cushions allows the seating
comfort to be optimized when necessary.
Inaccuracy in the application and use of the product and consequent
risks remain those of the "user". No contraindications have been
reported till date.
Maximum users weight - no limitation. For patients (weight above
190 kg) we recommend at least 7.5 or 10 cm height cushion.
The cushion is equipped with a flame retardant cotton/lycra-stretch
cover with non-slip base. The cushion corners are designed with
integrated metal eyelets to allow for fixing strips etc.
Cushion weights vary depending on size e.g.:
Code Measurement/Height
SKN4040 (1valve) 38 x 38 x 5 cm
SKN4045 (1valve) 38 x 43 x 5 cm
SKD4540 (2valve) 43 x 38 x 7.5 cm
SKD5045 (2valve) 47 x 43 x 7.5 cm
SKH3540 (4valve) 33 x 38 x 10 cm
SKH5055 (4valve) 47 x 52 x 10 cm
CONFORM ® Med. Luftpolsterkissen sind Medizinprodukte
der Klasse I (DE/CA/23/051603NA001.01)
® Products are fully
CONFORM Air Cushions are Medical Products
®
class I (DE/CA/23/051603NA001.01)
CE-Erklärung:
Der Hersteller erklärt hiermit, dass CONFORM
Luftkissen Systeme mit den Bestimmungen der Richtlinien für
Medizinprodukte 93/42/EWG übereinstimmen
CE-Declaration:
CONFORM Air Cushion Systems are in accordance with all
®
requirements for medical products as set out in 93/42/EWG,
made in the EC.
Hergestellt von / Manufactured by:
Wolff Kunststoffe GmbH
Industriestraße 28
69509 Mörlenbach - Germany
Steuernummer 007 248 13204
VAT No. DE 144458680
Weight
Zertifiziert nach/Certified according to:
850 g
1020 g
DIN EN ISO 9001:2008
1040 g
DIN EN ISO 13485:2012
1600 g
1090 g
2230 g
Version DTSCH/ENGL 04/2017
® – Med.
PRODUKTINFORMATION
GEBRAUCHSANWEISUNG
PRODUCT INFORMATION
OPERATING INSTRUCTIONS