SPL-Technik SPL 180 Benutzerhandbuch Seite 7

Preparation for flight
1. Charge the model and insert fresh
batteries in the transmitter.
2. Turn on the power of the transmitter.
3. Move the helicopter's power switch to
the ON position. The indicator on board
the helicopter should flicker brightly.
4. Place the helicopter on an even
surface in front of you.
5. Be sure that the distance between
you and the helicopter is around 2 metres.
6. Wait until the indicator on the model
stops flickering. Now you can take off smoothly
by moving the gas stick upwards.
Flight and manoeuvres
Important: only small and smooth changes in the position of
the sticks ensure stable flight of the helicopter.
Smoothly move the left stick upwards
Up
(away from yourself)
Smoothly move the left stick back
Down
(towards yourself)
Smoothly move the right stick forward
Forward
(away from yourself)
Smoothly move the right stick back
Back
(towards yourself)
Turn to the
Smoothly move the right stick to the right.
right
Turn to the
Smoothly move the right stick to the left.
left
Demo mode When you depress the demo flight button,
the demo mode is switched on. You just have
to control the gas and the helicopter flies
automatically.
Controlling To switch the accelerator function on
or off, press the button on the right
the
side of the transmitter. In acceleration
accelerator
mode, the helicopter accelerates to
maximum speed.
6