Use; Before First Use - Siguro Sgr-Eb-R150Y Handbuch

EN
1 Removable inner overlay
2 Foot warmers
3 Control unit
4 Temperature LED indicator lights
5 Temperature button
6 On/Off button
Power supply
Input
Dimensions
Control unit model

USE

Before first use

Remove the appliance and accessories from the box. Before disposing of the packa-
ging, be sure to remove all components. Check the appliance or accessories are not
damaged.
Using
1. Place the foot warmers on the place where you want to use it. The foot warmers
must be spread and folded out completely, it must not be folded, bended, or
creased.
2. Unwind the power cord and insert the power plug into a power socket.
3. Press the On/Off button once to turn on the foot warmers.
4. Repeatedly press the temperature button to set the desired temperature in the
range from 1 to 4, where "1" represents the lowest temperature level (only 1 LED
indicator light is on) and "4" the highest temperature level (all 4 indicator lights are
on).
5. The maximum operation time is 90 minutes.
Warning:
While the foot warmers are running, do not cover the control unit by other
blankets, pillows, or other similar items. It is important the control unit is
easily and freely accessible in case of a sudden switch-off.
6. When you do not use the foot warmers, press the On/Off button once, the LED
indicator lights switch off and the foot warmers stop heating. Disconnect the plug
from the power socket.
Important
To ensure a safe use of the product, observe the following precautions:
• Before each use, check the product, power cord, plug and control unit whether
220–240 V~, 50–60 Hz
80 W
32 × 32 × 26 cm
HD-20
EN - 8
3