Herunterladen Inhalt Inhalt Diese Seite drucken

Maintenance And Cleaning - Profi-Partner 51010 Handbuch

Inhaltsverzeichnis
Verfügbare Sprachen

Verfügbare Sprachen

POWER ON / OFF
1. Connect the plug to the power source.
2. Push the ON/ OFF button (7 in picture 3) to the position 1. In this way the Tool will start working.
3. Adjust the rotation speed using the manual governor on the Tool (8 in picture 3); turn it right to slow
down, turn it left to speed up.
4. Proceed working.
5. When finishing working, turn off the tool by pushing the ON/OFF button ( 7 in picture 3) to position
„0" Off-Position.

MAINTENANCE AND CLEANING

Before making any maintenance or cleaning intervention, check that the plug has been duly
disconnected from the power source.
Always keep clean the aeration slots.
Cleaning must be done by using a dry or slightly damp cloth.
Oil the moving elements periodically.
Do not use any caustic agents for cleaning plastic components.
Any faulty element must be replaced by the Manufacturer's Assistance Service.
ATTENTION!!!
Only for private use and only for the use mentioned in this manual. The returns will be impossible if products
were damaged because of incorrect use.
DISPOSAL:
The packaging material is reusable. Dispose of the packaging in an environmentally friendly way by
putting it in the appropriate recyclable waste collection containers.Dispose of the product and the
batteries in view of the environment if you want to separate. The device and the batteries must not
be thrown in with domestic waste. Take them to a recycling center for used electrical and electronic
devices. For more information you can consult your local government. Remove batteries first.
Eurotops Versand GmbH
Elisabeth-Selbert-Straße 3
40764 Langenfeld, Germany
If technical support is needed, please call ...
in Germany*
in Austria**
in Switzerland
in the Netherlands
in France
in Belgium
* At local rate from the German fixed network
** Free of charge within Austria
A possible return of products should be addressed to the return address stated on your invoice.
Hersteller / Manufacturer: Model CF1056-257PCS
Shanghai Everise Tools Indust.Co Ltd.
No.1298 Jiujing Road,Songjiang
Shanghai, China
02173-9246888*
0800 321 768**
071 274 68 06
020 262 195 8
037-28 44 400
02-27 33 300
or
info@eurotops.de
or
info@eurotops.at
or
info@eurotops.ch
or
info@eurotops.nl
or
info@eurotops.fr
or
info@eurotops.be
©
copyright EUROtops 25.09.2023
Inhaltsverzeichnis
loading

Inhaltsverzeichnis