Installing And Removing The Batteries - Tectectec Xpro3 Benutzerhandbuch

1. Installing Micro SD Card
Note: Please choose a branded Micro SD card, and then format it with the computer before use. We
suggest a high quality SD card for the perfect result.
2.

Installing and removing the batteries

 Slightly press and swipe the battery cap to open it.
 Correctly install the battery into the camera as indicated by +/- sign and make sure it is in the correct direction
with the arrows marked on the battery before you fit it in.
 Battery Gauge: Please refer to diagram
 Removing the Battery: Open the cap and pull out the battery
3. Charging
 You can recharge the XPRO3 Camera by connecting it directly to the computer or with the power adapter.
 It can be also charge with the car charger
 Action Camera can record the video while charging (Switch to Vehicle-mounted Mode in the "Menu")
 The camera can be charge even the power is switch off.
Quick start guide