RADICAL R-C11H Y1 Installationsanleitung Für Masten Seite 15

INSTALLATION
1.
Mount the GPS antenna (No. 2) in a
suitable place and make sure that the GPS
reception is not adversely affected by the
shading of metallic parts of the vehicle (heat
insulation glazing, etc.). Then lay the
connecting cable in the radio shaft.
2.
Route the USB extension cables (# 5, 6)
from the radio bay to your desired location.
3.
Connect the respective main connection
cable (# 11) of the Radical device (# 1) to the
plug of the vehicle and close the locking
mechanism of the connector. Then connect
the CAN-BUS interface (No. 12) to the main
connection cable. Connect
previously routed in the radio slot and the
original antenna cables to the Radical unit (#
1).
all cables