Ruris RTX101 Handbuch Seite 11

EN
4.2 Installation of the water tank
1. Mount the tank mounting frame on the trolley, figure 1;
2. Place the tank on the tank fixing frame, figure 2;
3. Connect the cutter's water hose to the tank.
4.3 Adjusting the cutting depth
Loosen the nut, push the handle forward to adjust
the depth of cut and then tighten the nut
1. Loosen the nut located on the frame, move the
wheel left or right to adjust the cutting position,
then tighten the nut.
5