Personal Security; Use And Maintenance; Technical Data - Ruris 1284E Handbuch

EN
Use only original spare parts and accessories from the manufacturer. Use of any other part may create a
hazard or cause damage to the product.
Do not charge the battery tool in the rain or in a wet place. This rule will reduce the risk of electric shock.
Battery powered tools must not be plugged into an electrical outlet; so they are always in working condition.
Be aware of potential hazards even when not using the cordless tool or when changing accessories. Following
this rule will reduce the risk of electric shock, fire or serious personal injury.
Disconnect the battery before servicing or cleaning the machine.
Use only batteries recommended by the manufacturer.
Do not dispose of batteries in fire, the cells may explode. Consult local regulations for possible special disposal
instructions.
Do not open or damage batteries. The released electrolyte is corrosive and can cause skin and eye irritation.
May be toxic if swallowed.
Do not place battery tools or their batteries near fire or heat. This will reduce the risk of explosion.
Do not crush, drop or damage the battery. Do not use a damaged battery or charger.
Do not point the tool at people or pets.
When not in use, the tool should be stored indoors in a dry, locked area out of the reach of children.
Handle the tool with care. Keep the tool clean for high performance.

PERSONAL SECURITY

All persons, children and pets must remain a safe distance from the work area.
Do not use the tool when you are tired or under the influence of drugs, alcohol or medication.
Do not use the tool for any work other than that for which it is intended.
Do not wear loose clothing or jewelry when using the tool.
Wear safety glasses.
Avoid accidental start. Make sure the switch is in the off position before connecting the battery or when
transporting the tool.

USE AND MAINTENANCE

Familiarize yourself with the tool. Read the manual carefully, learn about its applications and limitations, and
specific potential hazards associated with this machine.
Check for misaligned or jammed moving parts, broken parts, and any other defects that could affect the
operation of the tool. If damaged, repair the power tool before using it.
Do not force the power tool. Use the power tool correctly for your application.
Disconnect the battery from the power tool before making adjustments, changing accessories, or storing power
tools.
Check the operation of the tool before using it.
Do not use the tool if it does not have a legible warning label.
Use the power tool in accordance with these instructions, taking into account the working conditions. Using the
power tool for operations other than those intended could result in a hazardous situation.
Battery safety rules
Battery powered tools must not be plugged into an electrical outlet; therefore, they are always in working order.
Following this rule will reduce the risk of electric shock, fire or serious personal injury.
WARNING: When transporting or servicing the unit, always disconnect the battery.
serving
Tool maintenance should only be performed by qualified personnel. Service or maintenance performed by
unqualified personnel may increase the risk of accidents. When servicing a tool, use only original spare parts.
Some of the following symbols may be used on this device. Please study them and understand their meaning.
The correct interpretation of these symbols will allow you to use the machine better and safer.
Motor
Battery
Port number Batteries
Maximum speed
speeds
Telescopic tube
Battery level indicator
3

3. TECHNICAL DATA

Li-Ion 2 x20 V 4 Ah (total 40V, not included in
It can be extended 100 mm
Electric , brushless
the product)
4
21700 rpm
4+ Turbo
YES