Werbung
Montage-, Bedienungs- und Wartungsanleitung
VENT N Radialrohrventilator
10. Konformitätserklärung
EC Declaration of Conformity
The manufacturer
hereby declares that the product described below
Tipo
Serial number
CE mark date
complies with the requirements of the Low Voltage Directive 2006/95/EC based on the following harmonized standards
It also complies with the Commission Regulation (EU) No 327/2011 implementing Directive 2009/125/EC with regard to
ecodesign requirements for fans driven by motors with an electric input power between 125 W and 500 kW (including
those fans for replacement of identical fans integrated in products which were placed on the market before 1 January
2013)
Additional Information:
The product design is inherently benign, and fulfills the requirements of the EMC Directive 2004/108/EC with regard to
emission and immunity to electromagnetic levels.
EC Declaration of Incorporation:
(Directive 2006/42/EC, Annex II 1-B)
Should the product defined above, be used as part of a machine, then it must not be put into service until the machine in
which it is incorporated has been declared in conformity with the provisions of the Machinery Directive 2006/42/EC.
The Technical Director is the person authorized to compile relevant technical documentation in accordance with Annex VII
part B.
Compliance with EN ISO 13857 refers to safety devices when supplied, and installed, with the product. The responsibility
for compliance with EN ISO 13857 is the installer of the system where the product is applied.
We are committed to provide relevant information on this product in response to a reasonable request by national
authorities.
Signed by
www.solerpalau.de
S&P Sistemas de Ventilación S.L.U
C/Llevant , 4
08150-Parets del Vallès-Barcelona
IN-LINE FANS
VENT
All Manufactured
10
EN 60034-1
EN 60204-1
EN ISO 12100-2
EN ISO 13857
Carlos Campderrós
S&P Sistemas de Ventilación S.L.U
Diciembre 2013
1/1
VENT N
EN ISO 12100-1
Seite 7
Werbung
