EMPHASER EM-MBF1 Montage- Und Betriebsanleitung Seite 5

2
Place the panel on a clean, soft surface. The original speaker is plugged in at three points on
the panel. If necessary, use a plastic wedge to lever out the speaker.
3
Place the new EMPHASER speaker on the door panel. Push all three mounting balls into the
mounting holes one by one until they are firmly locked.
8
4
Disassemble the tweeter holder in the mirror triangle. If present, remove the original tweeter
and click in the new EMPHASER tweeter.
Mount the door trim in reverse order.
9