Herunterladen Inhalt Inhalt Diese Seite drucken
L5637
Bloomsbury Sideboard Drawer unit, White
Assembly Difficulty
one-person job
easy -
medium
- hard
Thank you for shopping with GLTC, we hope you enjoy
having this product in your home.
We know assembling furniture, toys or accessories is not everyone's
favourite way to spend their time, so we've tried to make assembling
this item as quick and painless as possible.
A few important pointers before you start:
Please read the instructions right through before you start, and
check that all the components have been included in the pack;
we find separating all the hardware into piles makes it easier to
be sure that everything is present and correct.
Make sure you have the right tools. Allen keys are provided
if required, but screw drivers and other tools are not. You'll
find details of the tools you need at the beginning of the
instructions.
It's a good idea to build the unit in the room where you are
going to be using it, to avoid the need to move it after it's been
assembled.
Do not throw away any packing materials until assembly is
complete, just in case you accidentally discard smaller parts or
hardware.
Could we do better?
If there is anything you think could be improved in these instructions or in the
assembly of this product we'd be grateful if you could let us know; we'll pass
any helpful hints and tips on to other customers via our website and update
the instructions.
All you need to do is drop us a line at info@greatlittletrading.co.uk
V1
Thank you
25/07/24
1
Inhaltsverzeichnis
loading

Inhaltszusammenfassung für Great Little Trading L5637

  • Seite 1 We know assembling furniture, toys or accessories is not everyone’s favourite way to spend their time, so we’ve tried to make assembling this item as quick and painless as possible. L5637 A few important pointers before you start: Bloomsbury Sideboard Drawer unit, White •...
  • Seite 2: Safety Warnings

    SAFETY WARNINGS! Service clientèle : Merci d’avoir fait vos achats chez GLTC. Nous espérons que vous apprécierez ce produit chez vous. Please read these instructions carefully before assembly. Nous savons que l’assemblage de meubles, de jouets ou d’accessoires n’est pas l’activité la plus agréable. C’est pourquoi nous •...
  • Seite 3: Advertencias De Seguridad

    Kundendienst: Servicio de atención al cliente: Vielen Dank, dass Sie sich für GLTC entschieden haben. Wir hoffen, dass Ihnen dieses Produkt viel Freude bereitet. Gracias por comprar en GLTC. Esperamos que disfrute de su producto. Wir wissen, dass nicht jeder seine Zeit gern mit dem Zusammenbau von Möbeln, Spielzeug oder Zubehör verbringt. Daher haben wir No a todo el mundo le gusta montar muebles, juguetes o accesorios.
  • Seite 4 Component Check List Component Check List 1x Side Panel 1x Side Panel 2x Back Panels (Top/Bottom) 1x Mid Back Panel 1x Upper Shelf 1x Vertical Divider Panel 2x Drawer Sides 2x Drawer Sides 1x Lower Shelf 4x Wooden Feet 2x Drawer Back Panels 2x Drawer Base Panels 1x Base Panel 1x Top Panel...
  • Seite 5: Hardware Check List

    Hardware Check List Hardware Check List 28x Cam Dowels 24x Wooden Dowels 2x Flat Drawer Runners 2x Unit Connectors 35mmL 25mmL 28x Cam Locks 4x Bolts 4x Connector Screws 1x Anti Tip Kit 28mmL 18mmL You will need (not supplied) 26x Round Headed Screws 24x Flat Headed Screws Phillips Head Screwdriver...
  • Seite 6 STEP 2: Hardware for Step 2: Hardware for Step 1: Connect the vertical divider panel (D) to the upper shelf using the hardware shown. 2x #2 Wooden Dowels 2x #1 Cam Dowels STEP 1: 2x #3 Cam Locks Build this unit on a protective surface such as a carpet or rug. Take panel C and insert 2x cam dowel hardware #1 into the holes shown.
  • Seite 7 STEP 3: NOTE: Hardware for Step 3: Hardware for Step 4: You are building this product Take both side panels (A & B) and position as below. Insert with the BACK facing UP. The 8x hardware #1 in the holes shown. 4x #2 8x #1 Wooden Dowels...
  • Seite 8 Hardware for Step 5: Hardware for Step 6: 4x #2 4x #1 Cam Dowels Wooden Dowels 4x #4 Bolts 28mmL 4x #3 Cam Locks BASE NOTE Ensure the small drill holes on STEP 6: the inside of panel B are at the BASE end of the product.
  • Seite 9 Hardware for Step 7: Hardware for Step 8: 6x #1 Cam Dowels 4x #2 Wooden Dowels 4x #3 Cam Locks BASE Note The groove on the base panel is facing up. STEP 8: STEP 7: Prepare top panel H by inserting 6x cam dowels (#1) in the holes as shown. Insert 2x wooden dowels (#2) into the inner drill holes on the edge of BOTH side panels A &...
  • Seite 10 Note Hardware for Step 9: Hardware for Step 10: These screw holes should be left blank to attach the anti-tip kit (step 18). 6x #2 26x #5 Wooden Dowels Round Headed Screws 14mmL 6x #3 Cam Locks STEP 10: STEP 9: Position the back panels as shown - panel I at the top and bottom and panel J in the Insert 6x wooden dowels into the middle holes on each edge of panels A, B &...
  • Seite 11 STEP 11: STEP 12: Hardware for Step 11: Hardware for Step 12: Create the Drawers. Take 1x panel K & 1x panel L (with runners and wheels on the outside) and join with 1x back panel M using 2x wooden Attach the L-Shaped drawer runners (#7) to the side panels 8x #8 Screws 25mmL...
  • Seite 12 STEP 13: Hardware for Step 13: Hardware for Step 14: Take both drawer front panels O and insert 4x cam dowels (#1) into the drill holes on the edges of each panel. 8x #1 Cam Dowels Now attach the handles on both panels using the thinner handle bolts (#9).
  • Seite 13 STEP 16: Hardware for Step 15: Insert the drawers into the unit. 2x #11 Flat Drawer Runners 6x #6 Flat Headed Screws 14mmL STEP 15: Add 2x flat drawer runners (#11) onto the inside of the side panels with 3x flat headed screws (#6) for each runner using the holes shown.
  • Seite 14 STEP 17: STEP 18: Hardware for Step 18: We strongly recommend that you attach this Your unit is now complete. unit to the wall to prevent injury from the unit tipping over. Attach the 2x anti-tip brackets to your unit using the hardware and instructions included in 1x #14 Anti Tip Kit...
  • Seite 15 Remove the back panel screw before using the drill hole for 2x #12 Unit Connectors the new screw and connector plate. If you are joining the the units together, please use a set of anti-tip straps on each 4x #13 Screws 18mmL unit. Copyright© Great Little Trading Co Ltd 2024...

Inhaltsverzeichnis