Yuer Power Board S Betriebshandbuch

Power Board
soo
Operation Manual
For the safety and better use of product, please carefully read and understand
in this manual. The content in this manual is only a direction
operation. Thanks!
The power supply includes 9 effector power output interfaces and 1 standard USB power output interface.
The voltage of the 1st to 7th effector power output interfaces is 9V; The voltage of the 8th effector power output
interface is 12V; The voltage of the 9th effector
standard USB interface is 5V and can supply power for mobile phones and iPad.
PRECAUTIONS SAFE OPERATION
1. Please turn off the power switch of adapter when not using the product.
2. Please connect the adapter with IN input interface before use, unsuitable input interface may result in equipment
damage.
3. Since the output port has overload and short-circuit
load of each circuit to avoid overload protection
DETAILED SAFE INSTRUCTIONS
1 . The product shall be used within the specific
2. Only the attached extension cord and patch cord can be used.
3. Do not use the product in high-humidity environment
splashing into port.
4. Prevent foreign matters (paper, plastic or metal) from inserting or falling into the gap or opening of this product.
5. To avoid damage, do not operate the product with excessive force.
6. To keep surface clean, wipe the product with clean and dry cloth. Do not use liquid cleaner such as benzene,
banana oil, detergent and combustible polishing
7. The symbol is to warn users not to push the movable rack that contains machine on the top without
protective measures, so as to prevent machine
interest, please use the movable rack, tripod, foot stool, fixed frame and control table produced or
recommended by the manufacturer.
8. Please do not open the equipment or disassemble/transform
parts that can be repaired by users. If abnormity
repair.
9. Do not discard the equipment and household
pollution and health hazard. The treatment
agency for more details.
10. The specification of product is only applicable
telephone, please verify whether it can be used in your region. It may be dangerous if the product ISused in
unverified region, and the user shall not enjoy the warranty
Please keep the invoice properly as purchase evidence, or you cannot enjoy the warranty right provided by
manufacturer or distributor.
11. To prevent electric shock, the machine case shall not be disassembled by unauthorized
use or install alternative devices on the product or execute unauthorized
cannot be used by operator; for repair service,
12. To avoid personal injury or product damage, please refer to the warning or precautions in the manual.
all safety and use instructions
for use and may be slightly different
power output interface is 18V; The voltage of the 10th
protection, if the equipment current is unknown, reduce the
during use.
voltage and current scope.
such as rain and water mist, and prevent
agent.
falling and cause unnecessary personal injury.
the internal parts. The equipment
occurs, stop using at once and ask maintenance
waste together. Proper treatment can reduce environmental
methods are different for different places. Please contact
to specific area. When purchasing the product
right provided by the manufacturer
personnel. Please do not
modification. All the internal parts
please contact with the trained professionals.
PART NAME AND
1. DCI 8V input interface:
Users shall bear the responsibility
unverified power adapter.
2. The 1st to 7th DC output
current of port: 200mA; the indicator beside the socket shall be ON in normal case and OFF when not connecting
with DC line or overloaded
3. The 8th DC output socket: DC+ 12V power output: external positive and internal negative, maximum output
current of port: 200mA; the indicator
with DC line or overloaded
4. The 9th DC output
current of port: 200mA; the indicator beside the socket shall be ON in normal case and OFF when not connecting
from actual
with DC line or overloaded
5. The 10th standard USB socket: DC +5V power output: maximum output current of port: 500mA; the indicator
beside the socket
CONNECTION MODE
AC power input
100-240v
O Please use the attached adapter and connect the power IN
liquid from
interface; Please note that the input voltage of equipment
is DC18V, and the polarity is e-@-O
@ 7 DC+9V output socketscan be connectedwith suitable
effector for power supply
@ 1 DC+12V output socket can beconnected with suitable
effector for power supply
@ I DC +18V output socket can be connected with suitable
For your
effector for power supply
6) The standard USBinterface provides 5V output and can
supply power for mobile phones and iPad.
does not include
personnel for
SPECIFICATIONS
with local
• Power supply: 18V,1.2A external supply
• Outputs: 10 isolated power outputs
on Internet, or
(7x9V/200mA, 1 x 12V/200mA,
• Dimensions and weight (H x W x D)
or distributor.
Power Board S: 132x485 x43 mm/O.83 kg
Power Board M: 31 Ox485 x44mm/1.32kg
Power Board L: 31 Ox600x44 mm/ 1.6kg
• Accessories: 1 x power supply 18V/1.2A, 9x pedal connection
FUNCTIONS
DC18V DC OUT e-«-e
1200
n a ooaa a
2
for the insertion of output plug of power adapter.
if the main engine or other equipment
socket: DC +9V power output: external positive
beside the socket shall be ON in normal
socket: DC +1 8V power output: external positive
shall be ON in normal case but OFF when overloaded
DC18V OC OUT
9V/200mA
n a ooaa
ocyvt•s
REPEAT
ANALOG
DELAY
IXI 8V/200mA, lx5V/500mA USB)
cable, 1 x roll of self ad-hesive velcro tape
DC OUT
USB OUT
12V 18V
5V/500rnA
3 4 5
Please do not use other power adapters.
is damaged due to use of untested/
and internal negative, maximum output
case and OFF when not connecting
and internal negative, maximum output
DC OUT
r- 200mA
USB OUT
12V 18V
5W500mA
a
o
6
3 4
TONE
RETRO ALL IN
OVERPRIVE
nousv
gypnss
EffEc• PEDAL
OZc€r-€
MADE IN CHINA