SKS Germany +COM/UNIT Gebrauchsanleitung Seite 8

Product
State- LED
USBoutput
USBInput
Quick start Guide
.COM/UNIT - Charging without cable
1. To start, press the powerbutton on the side. The blue LEDon the right will turn on for "power"
and the battery level indicator orangeLED's will turn on.
Placeor dock your smartphoneor mobiledevicewith Qi support on the .COM/UNIT and start
2.
charging.
3. Make sure you place your smartphone in the middle of the SKS logo. Otherwise, the blue LED
starts blink rapidly, which meansthat an error has occurred during the chargingprocess. In this
case,removeyour smartphone from the .COM/UNIT andcorrectits position.
.COM/UNIT -Thechargingby the USBport:
1. Connectthe USBcable to the .COM/UNIT output jack and then connect it to your tablet or
smartphone.
Charging the.COM/UNIT:
Charge the .COM/UNIT with a suitablecharger.Alternatively,the .COM/UNIT canalsobe loaded
1.
via COMPITholder in conjunction with a suitable e-bike (not included).
Whenthe .COM/UNIT battery is fully charged,all four orangeLEDswill be on. Approximate
2.
charging time is 6+ hours (depending on the charger).
Qi-chargingsurface
PowerON/OFF
COMPIT Input