UNI-T UT305H Bedienungsanleitung

PIN:
u-r305H
Infrared Thermometer
User Manual
Dear Users
Thank you for purchasing the new infrared thermometer.
and correctly, please read this manual thoroughly, especially the Precautions part.
After reading this manual, it is recommended to keep the manual at an easily accessible
place, preferably close to the device, for future reference.
Limited Warranty and Liability
Uni-Trend guarantees that the product is free from any defect in material and workmanship
within one year from the purchase date. This warranty
by accident, negligence, misuse, modification,
dealer shall not be entitled to give any other warranty on behalf of Uni-Trend. If you need
warranty service within the warranty period, please contact your seller directly.
Uni-Trend will not be responsible for any special, indirect, incidental
or loss caused by using this device.
Introduction
The UT305H infrared thermometer (hereinafter
and accurately determine the surface temperature
from the target surface. It is suitable for non-contact temperature measurement.
A Precautions
To ensure proper use of the thermometer,
To ensure safety and accuracy of the thermometer, it should only be repaired by a qualified
professional using original replacement
If the battery symbol on the LCD flashes, please replace the battery immediately to prevent
inaccurate measurement.
Inspect the case before using the thermometer. Do not use the thermometer if it appears
damaged. Look for cracks or missing plastic.
Avoid keeping the thermometer near high temperature environments for long periods.
To ensure measurement accuracy, please use the thermometer
[150c-300c, RH (non-condensing)].
Please use the thermometer indoors.
The ambient temperature of the measured
measured in places with large airflow such as fans and air outlets.
When changing to a new environment,
use.
When the measured object comes from a place with a large temperature
the measurement environment, keep it in the measurement environment for 10 to 30
minutes before measuring.
Do not use the thermometer in places with strong sunlight or electromagnetic interference.
After measuring extremely high or low temperature
for 10 minutes before next use.
It is recommended to measure three times at a time, whichever
of data.
Make the sensor window directly face the measured object during measurement, otherwise
it will cause the measured temperature
Not for medical use
Specifications
Model
Measuring range
LCD size
LCD display
Accuracy
Optimal measuring distance
Repeatability
Response time
Spectral response
Auto power off
Low battery indication
High temperature LED alarm >37.2
High temperature audible alarm
Data hold
Unit conversion (OC/OF)
Operating environment
Transportation/Storage environment
Battery type
Continuous temperature measurement:
Battery life
the alkaline battery;
Accessories
Product Features
Bright, easy-to-read, and high-contrast
With two-color (orange and green) LED and buzzer alarm functions
With tripod mounting hole (1/4inch)
In order to use this product safely
does not apply to damage
contamination or improper handling.
or subsequent
referred to as the thermometer) can quickly
by measuring the infrared energy radiated
please read this manual carefully before use.
parts.
in the operating environment
object must be stable, and it should not be
please leave the thermometer for 30 minutes before
difference from
objects, please leave the thermometer
is the most displayed
to be different from the actual temperature.
UT305H
320C-42.90C (89.60F-109.20F)
30mm*30mm
TN LCD
±0.30C (±O.60F)
5cm—1 Ocm
0.30C (O.60F)
<250ms (95% of reading)
8pm—14pm
15s
0 • orange light alarm (<37.20C: c. green light)
>37.20C: audible alarm
150c-300C (590F-860F), RH
-200c-600C (-40F-1400F), RH
9V battery (6F22)
hours for
hours for the carbon battery
Battery, user manual
display
External Structure
Infrared sensor window
Trigger
2
Battery cover
3
Tripod mounting hole
4
LCD display
5
6 Buttons
LCD Description
Buzzer indicator
Temperature
HI 0K LO
caused
Low battery indicator
The
Temperature
SCAN
Temperature
HOLD
damage
OcOF
Temperature unit indicator
8888
Display of the measured temperature
Operating Instructions
Power On
In the off state, short press the trigger to turn on the thermometer.
Power Off
In the HOLD mode, if there is no operation for 15s, the thermometer
Manual Measurement
1. Pull and hold the trigger after aiming at the measured object. The SCAN icon will be flashing
indicating that the target temperature
updated on the LCD.
2. Release the trigger, the SCAN icon disappears,
the measurement has been stopped and the last measured
3. When the measured temperature
light gives an alarm.
Temperature Unit Setting
In the HOLD interface, short press the SET button to enter the temperature
and switch between oc and OFby pressing the V button or A button.
Audible Alarm Setting
In the HOLD interface, short press the SET button twice to enter the audible alarm setting
interface, and turn on/off the audible alarm by pressing the V button or A button.
Maintenance
General Maintenance
As the thermometer is reusable apparatus, please pay attention to cleaning and maintenance
set
before use. If it is not in use for a long time, please keep its lens clean and dust free.
1. Clean the case: Wipe dirt with a clean soft cloth or cotton swab dipped in medical alcohol or
water.
2. Clean the lens: Use clean compressed
surface with a cotton swab dipped in medical alcohol or water.
Battery Replacement
If the thermometer is not in use for a long time, please
remove the battery to prevent battery leakage. Dispose of
used batteries properly in accordance
To replace the battery:
1 . Open the battery cover.
2. Replace with a 9V battery (6F22), noting the polarity.
3. Close the battery cover.
Troubleshooting
Symptom
HI appears
LO appears
Err appears at booting
Battery symbol flashes
UNI-T
UNI-TREND TECHNOLOGY
Made in China
4
2
3
HI
measurement alarm indicator
nnnn
measurement indicator
hold indicator
will automatically
is being measured. The measurement
and the HOLD icon appears, indicating that
value is held.
exceeds 37.20C, the HI icon is displayed and the orange
air to blow off loose particles.
with local regulations.
Cause
Measured value is greater
than the maximum range
Measured value is less
than the minimum range
Place
Exceeding the minimum or
ooc-500c
maximum operating temperature
environment
Low battery Replace the battery
(CHINA) CO., LTD.
o
6
LO
HOLD SCAN
power off.
result will be
unit setting interface,
Carefully wipe the
Battery
cover
Action
Stop measuring
Stop measuring
the thermometer in a
(320F-1220F)
for 30 minutes