Quick Start - Mephisto Exclusive Senator Bedienungsanleitung

To play a game right away, without reading the entire manual first, simply follow these Quick Start steps!
1
First, make sure that your
Exclusive Board is turned off.
Never insert a module while
the Exclusive Board is on!
2
Open the drawer in the front
of your Exclusive Board, and
swing the handle up. You will
see three slots. Insert the
Senator and LCD Modules
into any of the three slots
available, pushing them until
they are firmly in place.
3
Turn the Exclusive Board on,
and then press GO/STOP on
the Senator Module for at
least one second to turn the
module on. If the computer
doesn't respond, press GO/
STOP one more time.
4
Set up the chess pieces in
the initial starting position,
with the White pieces closest
to you. Make sure all the
pieces are centered on their
squares!

QUICK START

GO/
TAKE OPT LEV INFO POS
BACK STOP
ENT CL
GO/
STOP
5
To reset the module for a
NEW GAME of chess,
simultaneously press the
ENT and CL keys.
6 Enter your moves by simply
making them on the board.
When the computer moves,
board lights indicate its
move. If you installed the
LCD Module in Step 2, the
display will show the piece,
the color, and the from and
to squares of the computer's
move. Here, the computer
wants to move its Black pawn
from E7 to E5. Lift the Black
pawn and make the move on
the board. This completes
the computer's move, and
now it's your turn again.
Enjoy your game!
Press GO/STOP at any time to turn the Senator Module off
(before switching off the Exclusive Board). Your current game
(up to 200 individual moves) will be stored in memory.
When you switch back on, you can continue playing right where
you left off.
ENT
CL