Obelink YUKON Kurzanleitung

YUKON BAMBOO
Obelink
I Specifications- -2 II product
Specifications
RECHARGABLE
MANUAL
Rated power (W)
Rated voltage (V)
Dimming range (W)
Color temperature
Color rendering index (Ra)
Luminous
USB input
Battery type
Battery Capacity (mAh)
Charge time (H)
Use Time (H)
Working temperature
Operating humidity (%)
Weight (g)
Materials
P rating ('P)
details & manual - -3
2
Specific for DG3V bulb
5% - 100% (0.3W - 6W)
(K)
2700 K
Raz80
flux (Lm) 10-200 Lm
5V/1A
Lithium battery
3.7V 5000mAh
28 hours
8—120 hours
(oc) -200C-600C
750 g
Plastic, aluminium, bamboe
IP20
O
260 mm
126 mm
Product details
Front
3. Knob switch
Press the button
Handle
Turn the knob clockwise
light intensity, turn the knob
counter-clockwise
intensity. Briefly press the knob again to
switch the lantern
2. Light source
When the battery runs low, the amp will
switch itself Off, turn
3. Knob switch
before charging it.
Back
4. USB interface
As the below picture shown, open the
rubber cover:
Input
Charging interface
4 USB
DC 5V adaptor (not included)
interface
Do not use unmatched adaptor
If the green indicator light flashes, the amp is charging. If the green indicator light is
constantly on, the lamp is fully charged. f the USB output is used to charge external devices,
the red indicator lamp lights up. When the red indicator light flashes, the power is Off.
Note: The USBoutput for charging cannot be used while charging the lantern.
to turn the antern on.
to increase the
to decrease the light
off.
Off the lantern
ndicator
USB output interface
3