Cleaning And Maintenance - Proregal Rts2-01 Handbuch

CAUTION
Risk of injury due to improper use.
Do not leave young children unattended with
the product.
Loading and unloading of the device must be
done manually only.
ATTENTION
Damage to the product due to incorrect use.
Before use, make sure that the product is not
damaged.
The use of a defective or damaged product is
prohibited.
6. Storage
ATTENTION
Material damage due to incorrect storage.
Cover the product with a film or blanket to
protect it from dust when not in use for long
periods.
Store the product assembled and upright or
disassembled and covered in a dark, cool, dry
and well-ventilated place.

7. Cleaning and maintenance

ATTENTION
Damage to the product due to incorrect cleaning
agents.
Check the compatibility of the cleaning agents with
the surface on an inconspicuous area of the
product.
Only use cleaning cloths and soft brushes.
Remove dust and light dirt with a damp cloth or a
soft brush.
For coarser dirt, use a mild, non-flammable cleaner.
Check the attachments and screws regularly for
tightness and tighten the screws if necessary.
Have defective or damaged parts replaced
immediately by trained specialist personnel and in
consultation with the manufacturer.
Hergestellt für Procommerce Group GmbH - Am Kreutweg 1 - 97204 Höchberg - Germany
Maintenance schedule
Frequency: before each loading and unloading
Condition
Check the overall condition of the transport device.
It may only be used if it is in perfect condition.
Frame condition
Check the transport device for visible damage, rust
or loose parts.
Rollers condition
Make sure that the castors are free of dirt, stones or
other obstacles that could impair rolling.
Payload
Make sure that the payload does not exceed the
maximum permissible load weight.
8. Repair
ATTENTION
Damage due to improper repair.
Only have repairs carried out by the
manufacturer or by specialist personnel who
have been trained by the manufacturer.
Only use spare parts approved by the
manufacturer.
9. Dismantle
ATTENTION
Damage to the product due to incorrect dismantling.
Dismantle the product completely and safely.
Do not use electric screwdrivers for
disassembly.
Dismantle the product in reverse order of assembly.
EN