Herunterladen Diese Seite drucken
AOSHIMA
AW-
1/48
Information importante å lire avant de monter ce modåle :
Ce rnodéle doit étre assemblé. Lisez les instructions de montage avant de commencer rassemblage.
Apres déballage du kit . veinez å vous débarrasser des sacs en plastique pour eviter tout risque
d'étouffement des enfants en bas age qui pourraient les placer sur leur téte.
Détachez soigneusement les branches d'arbres, et jetez les déchets.
• En raison des conditions de fabrication. certaines piOces possMent des parties pointus qui peuvent
étre dangereuses. S assurer de ne pasjouer avecle contenuen rutilisantpourcfautresbuts.Les
famines ayant des enfants en bas åge devront faire tres attention.
• Utilisez une pince Coupante pout
les pieces. et éliminez toutes les bavures résiduelles sur
les pieces
"aide dun couteau de modélisme ou dune lime. Puisqu'une manipulation incorrecte des
pinces, des couteaux de modélisme ou des limes Peut se prtxjuire, il y a risque de blessure des
mains. des doigts
des jambes. les enfants de moins de 10 ans devront demander a leurs parents
ou leur gardien d'effectuer les travaux.
Ce kit contient de petites pieces, ne convient pas a des enfants en-dessous de rage prevu pour
Cusage de ce produit:risqued'étouffement. D u faitd'un risqued'étouffement. s oyezabsolumentsür de
ne pas les donner aux enfants plus jeunes que l'åge prévu pour "usage de ce produit.
Lorsquevous utilisezde la colleet dospeintures,suivezattentivement l es pointssuivants
La colle et les peintures ne doivent pas étre ingérées. car ii y a risque d'empoisonnement.
Si la colle ou les peintures entrent en contact avec les yeux, lavez avec une grande quantité cfeau et
Contactez
immédiatement
un doctour.
Mutilisez pas la colle ou les peintures dans des endroits fermés, car il y a risque dempoisonnernent.
veillez
travailler dans un endrct bien ventilé ou prés d'une fenétre ouverte.
Mutilisez pas la colle ou les peintures pros de sources de Chaleur ou dune flamme. car il y a risque
d'incendb.
• Ne laissezpasce produitdans desendroitsexposésdirectement la lumiéredu soleilou dansdes
endroits
me
température ou humides.
AOSHIMA
BUNKA
KYOZAI
No.AW-01
T420-0922
1æ3 RYUTSU CENTER, AOI-KU, SHIZUOKA CITY, SHIZUOKA 420-0922, JAPAN
co.
Ltd.
Universal
Important Information to be Read before Assembling this Product
• This model needs to be assembled. Read the assembly instructions
assemble
it.
• After taking the product Out of the plastic bag, tear the plastic bag and discard it, since there
will be a danger of suffocation if young children place the bag over their head.
Cleanly clip the parts from the trees, and discard the trees after all the parts have been
clipped.
• Due to manufacturing circumstances it is unavoidable that there will be sharp places which
will be dangerous. Be sure not to play with the contents such as by using them for other
purposes. Households with young children should be particularly careful.
• use nippers for removing parts. and finish any burr remaining on parts using a knife Orfile.
Because the mishandling of nippers, cutter knives or files may result in sharp edges cutting
hands, fingers, Or legs. children younger than 10 years old should have the work carried out
by a parent or guardian.
• As the kit contains small parts, take care not to swallow them by mistake, since there may be
a danger of choking. Due to the danger of mistakenly swallowing parts, be absolutely certain
not give them to children younger than the target age.
• (In the situation where you use cement or paints, take care of the following points)
Do not put cement or paint in your mouth, since there will be a danger of poisoning.
If cement or paint gets in your eyes, immediately wash it away with a large amount of water
and consult
a doctor.
Do not use cement Orpaint in enclosed rooms. since there will be a danger of poisoning.
Absolutely do not use cement or paint near sources of flame, since there will be a danger of
ignition.
• Do not leave the product in locations subject to direct sunlight or in places with high
temperatures or much humidity.
Wichtige Information vor dem Montieren dieses Modellbausatzes:
Dieses Modell muss montiert werden Lesen Sie vor der Montage die Montageanweisungen durch.
• Nach dem Entfernen der Teiie des Modellsatzes reißen Sie die Plastikverpackungstüte auf, um zu
verhindern, dass Reine Kinder damit spieten und sie sich über den Kopf zienen; dabei besteht
Erstickungsgefahr.
• LösenSie dieBausatztoilevorsichtigausden Spritzlingen und entsorgenSieden Abfall.
Herstellungsbedingt ist eS unvermeidlich, dass es scharfkantige Stellen gibt, die gefährlich sein
können. Stellen Sie sicher. den Inhalt nicht zu anderen als den vorgesehenen Zwecken Zu verwenden.
Bausätze wegen verschluckbarer Kleinteile außerhalb der Reichweite von Kindern aufbewahren.
Verwenden Sie eine Kneifzange zum Entfernen von Tellen und entfernen Sie Grate mit einem Messer
Oder einer Feile. Durch falschen umgang mit Kneifzangen, Schneidrnessern Oder Feilen können
scharfe Kanten mit Verletzungsgefahr entstehen. Daher nicht geeignet for Kinder unter 10 Jahren und
nur unter Aufsicht
eines erfahrenen
Erwachsenen.
• Der Bausatz enthält verschluckbare Kleinteile_Es besteht Erstickungsgefahr! Bewahren Sie die Tede
daher außerhab
der Reichweite
von Kindem
aut
• Bei Verwendung von Klebstoffen und Lacken achten Sie auf die folgenden Punkte:
Klebstoffe und Lacke dürfen nicht verschluckt werden. da Vergiftungsgefahr besteht.
Falls Klebstoffe Oder Lacke in die Augen geraten. sofort mit viel fließendem Wasser ausspülen und
anschließend
einen Arzt aufsuchen.
Klebstoffe und Lacke dürfen nicht an gesch'ossenen Orten verwendet werden, da beim Einatmen
Vergiftungsgefahr
besteht.
Klebstoffe
und Lacke dürfen nicht in der Nähe offener Flammen
Entzündungsgefahr besteht.
• LegenSiedas Produktnicht im direktenSonnonlichtOderan Ortenmit hohenTemperaturen Oder
Luftfeuchtigkeit ab.
City Studios
LLC. All Rights
Reserved.
before beginning
to
ver-wendet werden.
da
loading

Inhaltszusammenfassung für AOSHIMA AIRWOLF AW-01

  • Seite 1 AOSHIMA No.AW-01 1/48 Universal City Studios LLC. All Rights Reserved. Important Information to be Read before Assembling this Product • This model needs to be assembled. Read the assembly instructions before beginning assemble • After taking the product Out of the plastic bag, tear the plastic bag and discard it, since there will be a danger of suffocation if young children place the bag over their head.
  • Seite 2 FILE No.A56-7W AIRWOLF AIRWOLFte 300J,yb aommyx—s--/jjsy 40rnrn*VJYÆ x 12Z...
  • Seite 3 Painting * FarbenundKlebstoffe for müssengetrenntgekauft w erden. Weitere Einzeheiten Ober die Verwendung der Werkzeuge und Lacke siehe Erklårungen auf dem betreffenden Produkt. Les peintures aqueuses Hobby Color ne peuvent pas étre mélangéos aux peintures de Mr. Color. indi,que l e chirrede de Rinturesaqueuws HotöyColor(GSICreosCorwation).
  • Seite 4 < Paint instruction for body ) is Paint Mark (20%) Body color : PH 12 (Under coat : (Under coat :...
  • Seite 5 h•y5— plastic cement Plastikkleber Bitte vor dem Zusammenbau bereitlegen. mipoer/Zwickzange/Pinces/N+ Colle pour modéle réduit Préparez avant dlassembler. cutter/Abbrechklingemesser/Cutter/J)A tweezers/Pinzette/Pincettes/W+ PH[$ (50%) Insert@into@ Do rx)t use any glue in order to rotate main rotor. PH 12 oono 00200 08B8 001—10 PH 69 pH[j2)
  • Seite 6 PH[5](30%) Figure Figure Projection Mount Figure@at t hefront s eat. Angle the arms as you like, and mount Figure@ at thefrontor rearseat. Afterattaching@,Figure@can't b emounted. Incaseyouwantto mount F igure@attherearseat, a ttachOand@ after mounting Figure@ Assernbling order. (50%) + PH[4] (50%) A.r.i•:, (50%) .
  • Seite 7 FRONT PH(S) oC<0 Take care not to drop (Under coat : PH@) Choose and build one of the body options.
  • Seite 8 PH@J@ Wiper Attach the lower part first. Easier to fit. Reverse side Don't cut off this part. Glue thepart T ailRotor t o @ DO notglueit to @in order t o rotate it. The part assembled in Glue the Armor Parts such as machine guns if you like.
  • Seite 9 REAR The part assembled Glue the Armor Parts such as wheel assembled machine guns it you like. FRONT wheel assembled Fix the pipes to the hinges by using the instant adhesive. Use the instant adhesive. (*Caution; The for plastic cm't bond them.) Washer ermv—v: All parts:...
  • Seite 10: Parts List

    Small poly-bag Decal Screw If-MI Pipe (L) Poly cap 40mrn Washer 'MI(S) Pipe(S) 30mm No.AW-01 1/48 (09-0330-1.2) 1000B (09-0334-1) 800B URL: https://www.aoshima-bk.co.Jp/ (09-0330-1,2) 1200B 800B (09-0330-3) 500B (09-0329-1) 700B ('JUT) (09-0330-3) 800B (09-0329-2.3) 600B B" 600B 500B (09-0332-1) .800B 500B...