Change Of Hinge Side - Nordcap W32 Bedienungsanleitung

GB
Change of hinge side - W32.
The door can be changed from right-hinged to left-hinged and vice versa as follows:
1. Rubber plug 2. Screw
7. Bottom, right 8. Screw
● Ensure that the cabinet is not connected
to the mains
● Remove the rubber plugs (1). See fig. 5.1
● Remove the screws (2) and take off the
hinge cover (3)
● Remove the 3 screws (4) which hold the
top hinge and lift off the top hinge (5)
SUPPORT THE DOOR! See fig. 5.2
● Lift off the door (6) and place the cabinet
on the back
● Remove the 3 screws (8) which hold the
bottom hinge (7) and dismount the low
cabinet foot (9) from the hinge. See fig.
5.3
Abb. 5.1
Abb. 5.3
3. Hinge cover 4. Screw
9. Cabinet foot, low
6
Abb. 5.2
Abb. 5.4
5. Top hinge 6. Door
10 Cabinet foot, high
● Dismount the high cabinet foot (10) from
the cabinet and remount it on the op-
posite side
● Move the bottom hinge enclosed to the
left side and mount the low cabinet foot in
this one
● Mount the bottom hinge in the left side
using the 3 screws (8)
● Mount the door on the bottom hinge
● Mount the top hinge, hinge cover, and
rubber plugs. See fig. 5.4.
● Mount the door handle on the opposite
side
● Lift up the cabinet again and wait 1 hour
before connecting to the mains to avoid
oil in the cooling system
GB