MSW Motor Technics MSW-RVPM-1200 Benutzerhandbuch Seite 12

c) Please be attentive and use common sense when operating this equipment. A moment's inattention
during operation may result in serious personal injury.
d) To prevent accidental start-up, make sure the switch is in the off position before connecting to a
power source.
e) The product is not a toy. Children should be watched to ensure that they do not play with the product.
2.4. Safe use of the device
a) Do not overload the device. Use tools that are suitable for the application. A correctly selected unit
will do a better and safer job for which it was designed.
b) Do not use the device if the "ON / OFF" switch does not work properly (does not turn the device on
and off). Units that cannot be controlled by the switch are unsafe, cannot operate, and must be
repaired.
c) Disconnect the device from the power supply before adjusting, cleaning, or servicing. This precaution
reduces the risk of accidental start-up.
d) Keep unused product out of the reach of children and anyone unfamiliar with the device or this
manual. Products are dangerous when used by inexperienced users.
e) Keep the product in good working order. Check before each use for general damage or damage to
moving parts (cracks in parts and components or any other condition that may affect the safe
operation of the device). If damaged, return the device for repair before use.
f) Keep the product out of the reach of children.
g) Repairs and maintenance should be carried out by qualified personnel using only original spare parts.
This will ensure the safety of use.
h) To ensure the designed operational integrity of the device, do not remove factory-installed covers or
loosen screws.
i) When transporting or moving the device from storage to the place of use, observe the health and
safety rules for manual handling applicable in the country where the device is used.
j) Clean the device regularly to prevent permanent dirt build-up.
k) The product is not a toy. Cleaning and maintenance must not be performed by children without adult
supervision.
l) Do not tamper with the device to alter its performance or design.
m) Keep the unit away from sources of fire and heat.
n) Do not block the ventilation openings of the unit!
o) CAUTION! Some parts of the unit become very hot during operation - there is a danger of scalding! Do
not touch these parts with bare hands!
p) Do not reverse the direction of rotation of the vacuum pump motor.
q) Fill up the oil before use.
r) Check the oil level regularly. The minimum oil level should not be less than 1/4 of the height of the oil
port, and the maximum oil volume should not exceed 3/4 of the height of the oil port.
s) If the oil contains water or other impurities, it must be changed.
t) The oil container must be emptied before transporting the device.
u) The exhaust filter should be replaced every six months.
v) It is forbidden to pack flammable and explosive materials.
ATTENTION! Despite the safe design of the device and its protective features, and despite the use
of additional elements protecting the operator, there is still a slight risk of accident or injury when
using the device. Stay alert and use common sense when using the device.
3. Use guidelines
The machine is designed for vacuum packaging of food, cosmetics, electronics and other products.
The user is liable for any damage resulting from unintended use of the device.
EN