Using The Hand Switch; Overview Of The 6-Key Hand Switch; Drive Up To Position Manually - Phoenix Mecano Rk Rose+Krieger Rkpowerlift M Memory Montageanleitung

7. Working life

7.7 Using the hand switch

You control lifting columns with the keypad on the hand switch. You can also store positions for
a specific user or set the controls.

7.7.1 Overview of the 6-key hand switch

Function key.
Select and display settings
1
(e.g. a user or a position)
Lifting column DOWN
2
Press the key to move the lifting column.
Lifting column UP
3
Press the key to move the lifting column.
Store keys 1 to 3
Selecting and driving up to user-specific positions or
4
carrying out settings
Display
Display the current position, settings and error messa-
A
ges

7.7.2 Drive up to position manually

•
Press the DOWN or UP key and keep the relevant
key pressed until the drive has moved into the desi-
red position.
The position of the lifting column appears in the display.
Ensure that nobody is in the vicinity of the drive when the lifting column is moving.
Therefore, only use the hand switch if you can see the lifting columns - Danger - risk
of accident!
You use the 8-key remote hand switch in exactly the same way as the 6-key hand switch.
52
1
F
2
I
A
3
III
4
II
RK-0005