NATIVE UNION Switch Bedienungsanleitung Seite 5

English
SWITCH BaSICS
after 30 minutes SWITCH will automatically
turn-off to preserve battery. To turn back on,
1. POwEr ON/Off push and hold the button until you hear the
Press and hold the button until you hear the welcome sound and the White LEd appears.
welcome sound and the white LEd appears,
your SWITCH is now on. Repeat to turn off.
2. sTaNdBy mOdE
your SWITCH will automatically go into
standby mode when there is no Bluetooth
®
device connected for 15 minutes. To wake-
up your SWITCH turn the wheel, or click the
button.
8
Downloaded from www.Manualslib.com
VERTICaL / HORIzONTaL
SWITCH can be used either vertically
or horizontally.
ON - Off
manuals search engine
CONNECTING
5. your device will either automatically
search for available Bluetooth
CONNECTINg alternatively manually instruct your device
1. Make sure your SWITCH is off. to search for Bluetooth
2. Press and hold the button; you will hear 6. Select "SWITCH by Native Union"
the welcome sound, continue to hold until • If asked enter password 0000
you hear the sonar sound, then release.
7. You will hear a confirmation sound and the
3. The LED will flash white and red white LED will flash every 3 seconds – you
alternately; you are now ready to pair. are now connected.
4. activate the Bluetooth setting on your BluETOOTH
®
device (the device needs to be within a The Bluetooth
metre of the SWITCH). meters from your mobile device.
auTOmaTIC rECONNECTION
® devices or If your mobile device goes out of range
the white LED will flash. When the last
® devices. connected mobile device is back in range
SWITCH will automatically reconnect, the
white LED will flash every 3 seconds and you
will hear a confirmation sound.
If your mobile device does not automatically
reconnect, use your mobile devices
Bluetooth menu to reconnect manually.
®
you only need to pair your device once.
wIrElEss raNgE To pair other devices please repeat the
®
® wireless range is up to 10 above steps. you can pair up to 8 devices.
English
9