BeeWi Mobile Wireless Gateway Router Benutzerhandbuch Seite 9

9
3.2.3 MAC Filter
This page allows you to configure MAC address filter to control devices
connected to the router.
3.2.4 Wireless Bridge
This page allows you to configure wireless bridge features of the wireless
LAN interface. This is useful if you want to use the router as repeater or
if you want to use wireless repeater stations connected to the router in
Access Point mode to extend the Wireless LAN coverage.
3.2.5 Advanced
This page allows you to configure advanced features of the wireless LAN
interface. You can select a particular channel on which to operate, force
the transmission rate to a particular speed, set the fragmentation threshold,
set the RTS threshold, set the wakeup interval for clients in power-save
mode, set the beacon interval for the access point, set XPress mode and
set whether short or long preambles are used.
3.2.6 Station Info
This page shows authenticated wireless stations and their status.
3.3 Management
3.3.1Settings
ENGLISH
Downloaded from www.Manualslib.com manuals search engine