Specifications - Konica Minolta Rx-Ii Bedienungsanleitung

Specifications

Image scanner section
Compressed format
JPEG fixed length format,
incompressible
4,096 × 2,048 dots × 8 bits for each
Image memory
RGB
SCSI terminal Half-pitch 50-pin connector (2)
Scanner type Draft shifting type/Transmission
color image scanner
Scanning method 1 path scanning with 3-line color
CCD
Image sensor 3-line color CCD, 2,700 picture
elements
Light source Halogen lamp 24 V, 60 W
135 film: 23.5 × 35.3 mm
Scanning size
IX240 film: 15.6 × 27.8 mm
Maximum resolution
135 film, IX240 film (slide):
2,212 dpi
IX 240 film (cartridge):
3,326 dpi
General
Power requirement
100 – 120/220 – 240 V AC,
50/60 Hz
Input current 1.2 A max. with maximum input
load at 100 V AC
0.6 A max. with maximum input
load at 220 V AC
Operating temperature
5 – 35 °C (41 – 95 °F)
Operating humidity
30 – 85 % RH
Main unit: 438 × 148 × 560 mm
Dimensions
(w/h/d) (17
inches) not including connectors
on the rear
Film carrier: 201 × 110 × 58 mm
(w/h/d) (8 × 4
not including projecting part
Slide carrier: 232 × 96 × 40 mm
(w/h/d) (9
inches) not including projecting
part
Mass Main unit: Approx. 12.2 kg (26 lb
14 oz)
Film carrier: Approx. 0.7 kg
(1 lb 9 oz)
Slide carrier: Approx. 0.4 kg
(14 oz)
Supplied accessories
Halogen lamp (1)
Film carrier (1)
Slide carrier (1)
Carrier cover (1)
AC power cord (1)
Driver Software (CD-ROM) (1)
Software Manual (1)
Design and specifications are subject to change
without notice.
× 5 × 22
1 / 7 / 1 /
4 8 8
× 2
3 / 3 / inches)
8 8
× 3 × 1
1 7 5
/ / /
4 8 8
21
(GB)