Hawk Spitfire Mk. 22 Kurzanleitung

RADIATORS
LOWER WING
SURFACE
Spitfire
HAWK . COPYRIGHT.
RS TESIö
TESTOR CORPORATION
LTD.
WESTON,
CANOPY
RIGHT FUSELAGE
HALF
PROPELLER
RETAINER
PROPELLER
Mk. 22
MAOE ANO PRATED
OF CANADA
ONT.
STAND ARM
STAND BASE
Model No. 405
/72 scale
Study the drawing above carefully before begin-
ning.
Glue the radiators to the bottom of the wing as
2.
shown in the small picture.
Place a drop of glue in the center hole of the
3.
propeller retainer
propeller shaft.
Lay the propeller shaft in the center groove at
4.
the front of the right fuselage
the edges Of the left half and now glue the two
halves together with the
inside the fuselage.
Glue the stabilizer
5.
6. Glue the wing to the fuselage.
7. Glue the clear canopy
Glue the stand arm
8.
9. Paint the model now. Use fiat enamels; a pattern
of green and gray on top, very light gray on bot-
torn—see box cover.
paint is dry. Glue the model to the stand.
STABILIZER HALF
DECAL
LEFT FUSELAGE
HALF
WING
DECAL
. . . glue the retainer to the
half. Put glue on
retainer caught
halves to the fuselage.
into place.
to the stand base.
Add the decals when the