HP RDX USB 3.0 Kurzanleitung

HP RDX USB 3.0
Removable Disk Backup System
External drive
Start Here
Commencez ici
Starten Sie hier
IMPORTANT INFORMATION ABOUT
YOUR NEW DRIVE
• The drive can be oriented horizontally or vertically.
• Select a flat, sturdy, level location for the HP RDX Removable Disk
Backup System that is close to the host server.
• Connect to a USB 3.0 port (on a computer running Windows®).
USB 2.0 is supported, but performance will be degraded.
• For optimum performance use HP-branded RDX Removable Disk
cartridges.
• Although RDX Removable Disk cartridges are ruggedly built, they
must be handled with care to ensure data integrity and long life.
• To ensure correct operation of the eject function, install the HP RDX
Utility. This utility also allows you to download and install firmware
upgrades. The utility and firmware upgrades are available from
www.hp.com/support/rdx.
1
Installation overview
IMPORTANT: For detailed, step-by-step installation
instructions, refer to the user guide found at
www.hp.com/support/rdx.
For important safety, environmental, and regulatory
information, see Safety and Compliance Information for
Server, Storage, Power, Networking, and Rack Products,
available at www.hp.com/support/Safety-Compliance-
EnterpriseProducts.
For optimum performance the drive should be
connected to a USB 3.0 port. The drive is
backward compatible with
USB 2.0, but performance
will be degraded. Do not
connect the drive to a
USB 1.1 port.
The supplied power cord
is appropriate for your
geographical region. Use it to
connect to the mains power
supply. (The drive is not
powered from the USB bus.)
2
Completing the installation
Install the HP RDX Utility from www.hp.com/support/rdx. If the
software is not installed, the eject button and right-click eject method
may not work properly.
Install or update backup software:
It is important to check www.hp.com/storage/spock for software
compatibility and install any recommended updates.
Diagnostic tools
The HP RDX Utility contains basic diagnostic tools, enables proper
cartridge ejection, and allows you to download and install firmware
upgrades. The utility and firmware upgrades are available from
www.hp.com/support/rdx.
HP Library & Tape Tools, which can be downloaded free of charge
from www.hp.com/support/tapetools, can also be used to determine
whether your product can operate properly.
3
Product Information
Product documentation
Product documentation is available in the Storage section of the HP
Enterprise Information Library:
www.hp.com/go/storage/docs
To find information for this product:
1. In the Products and Solutions pane, select HP StoreEver Tape.
2. Selct the types of documents and your languages.
3. In the HP StoreEver Tape pane, select your product.
Other sources of information
• www.hp.com/storage/spock (for computer, OS and software
compatibility).
• www.hp.com/support/ (for latest product details).
4
Using the RDX Removable Disk
Backup System
To load a cartridge:
Push the cartridge gently into the unit until it is locked into place with a
clicking sound.