General Maintenance; Safety Reminders - KOS HEIST Bedienungsanleitung

GENERAL MAINTENANCE

Tightening your compression
I
f your bars start to shake or move side to side, this means your compression needs to be tight-
ened. Do so by removing your handle bars and using a spanner to tighten the compression ring.
Turning it in a clock-wise direction, tighten until some pressure is felt in the spanner. You want
to be able to still spin your forks freely, however if over tightened, you can restrict the movement
and damage your compression or headset. This should be done by an adult or a professional
mechanic.
Lubricating your bearings
You will need to take off your wheels to lubricate your wheel bearings.
Insert the 2x 5mm allen keys, and turning them anti clock-wise. The wheels may need some
encouragement to slide out. Using a damp cloth wipe off any dirt or grime on your wheels and
bearings. Using bicycle bearing oil, place 3 to 4 drops directly on the bearing covers and allow
the oil to sink in. If the wheels do not spin freely after this you may need to replace the bearings.
Cleaning your scooter
Never use alcohol or any strong cleaning agents to clean your scooter. Doing so may damage
paint or fragile materials. Warm water and a damp cloth should be enough. Avoid putting water
directly on the grip tape and never submerge your scooter in water.

SAFETY REMINDERS

-When using this scooter for the first time, check that all the bolts are tightened. Inspect all
moving parts, including wheels and headset and ensure they are operating smoothly.
-Check and secure all bolts before every ride. Loose parts may damage your scooter or increase
the risk of a fall.
-Replace worn or broken parts immediately.
-Ensure you are wearing all required safety equipment before operating this scooter
Limited Warranty
The manufacturer warranties this product to be free of manufacturing defects for a
period of 6 months from date of purchase. This limited warranty does not cover normal
wear and tear, or any damages, failure or loss caused by improper assembly, maintenance
or aggresive use
This limited warranty will be void if the product is ever :
-used in a manner other than for recreation
-modified in any way, which includes installing any aftermarket parts.
The manufacturer is not liable for incidental or consequential loss or damage due directly
or indirectly to the user of this product.
For more information about the warranty contact Blunt/Envy Scooters.
5