B-LED B8150 Bedienungsanleitung

B8150
200W - 150W - 100W
LED HIGH BAY LIGHT
WARRANTY
1. 5-year warranty replacement warranty will be provided during the
warranty period if the lamp su ers quality problems.
During the warranty period, the customer shall return the damaged goods
2.
or failed parts for inspection and repair.
A replacement warranty will be provided once valid documents are
3.
presented.
WARNING
To avoid the risk of re, explosion, or electric shock:
This product should be installed, inspected, and maintained by a
quali ed electrician only, in accordance with all applicable
electrical codes.
* Verify power wire is by following per under applicable electrical codes.
& The light source contained in this luminaire shall only be
replaced by the manufacturer or his service agent or a similar
quali ed person.
& The external exible cable or cord of this luminaire cannot be
replaced; if the cord is damaged, the luminaire shall be
destroyed.
To avoid electric shock:
Be certain electrical power is OFF before and during
installation and maintenance.
Luminaires must be supplied by a wiring system suitable per
local code with an equipment grounding conductor.
To avoid burning hands:
Before to performing maintenance, ensure Luminaire is allowed to cool
after poweing o for a period of 30 minutes.
MOUNTING
PENDANT EYEBOLT MOUNTING
STEP 1
Thread the enclosed eyebolt hook into the top of the luminaire housing,
and tighten securely. Tighten the set screw to prevent the eyebolt from
loosening.
STEP 3
Refer to the Wiring Diagram to make electrical connections.
Instruction
Manual
The following circumstances will not receive replacement warranty:
Damage caused, including, but not limited to, damage from
①
abnormal working conditions, improper usage, storage that
does not conform to the instruction manual;
Dismantling, modi cation or improper installation or repairing of
②
the products without authorization;
③ Damages caused by environmental circumstances including, but not
limited to, re, ood, lighting strike, earthquake.
To avoid product degradation:
Do not operate in ambient temperatures above those
indicated on the luminaire date sheet.
Use proper supply wiring as speci ed on the luminaire date
sheet.
Avoid use in environments containing sulfur, chlorine or other
halides, methyl acetate or ethyl acetate, cyanoacrylates, glycol ethers,
formaldehyde, or butadiene.
Mount luminaire no less than 36 inches from the ceiling.
Make sure the supply voltage is within the voltage range stated
on the date sheet.
Aircraft cable mounting is recommended for dry locations only.
STEP 2
Use a chain, cable, mounting hook, or other mounting hardware to
suspend the luminaire. Make sure the mounting hardware is securely
attached to a stationary structure and strong enough to safely be
attached to a stationary structure and strong enough to safely suspend
the luminaire.
Page 1/2
1