XLOCK Wireless Keypad Bedienungsanleitung Seite 2

Instruction manual - EN
6. Images of buttons and light
Status light
Battery
Correct PIN number: Green LED lights up for 2 seconds
Incorrect passcode: Red LED lights up for 2 seconds
Press one of the buttons, the green LED flickers once.
Unable to connect to a lock: the red LED flickers 3 times.
Low Battery: The Low Battery Warning LED is lit.
Paring Mode: The green light flickers constantly.
7. Replace battery
1
Remove the screw, squeeze the clamp and pull out the battery holder.
2
Insert 4 AAA batteries correctly, squeeze the clamp and slide the battery
holder into the compartment, then tighten it with the screw.
Disposal
The wireless keyboard contain electronic
components and belong in the electronic hazardous
waste.
8. APP Installation
1.
2.
6.
7.
1. Activate the APP, select the lock to which you want to add a wireless
keyboard.
2. Press the settings button.
3. Press the Manage Accessories button.
4. Tap the button at the bottom right corner.
5. Tap the Add Wireless Keyboard button
6. If your wireless keyboard does not appear in the list, press the hardware
reset on the keyboard or enter *529#.
7. Tap the green button to add your wireless keyboard.
8. Give the wireless keyboard a name and tap ADD.
9. The wireless keyboard has now been successfully linked to the XLOCK
APP.
10. Now go back to the lock where you added the wireless keyboard. Press
the pin code icon in the display menu. and you can now create a pin code for
your lock.
© XLOCK, errors and misprints excepted
3. 4.
5.
8.
9.
XLOCK Wireless Keypad
1. Specifications
Model
Dimensions
Power
Voltage
Standy-by power consumption < 10μA
App / Cloud System
2. Maintenance, care, storage and transport
ATTENTION!
Use only a dry and soft cloth for cleaning.
Do not use detergents and chemicals.
Store the product in a cool and dry place.
Store the product out of the reach of children and in a dry and dust-
protected environment when not in use for a long time.
Keep the original packaging for transport.
3. Disposal instructions
According to the European WEEE Directive, electrical and
electronic equipment must not be disposed of with household waste.
Their components must be recycled or disposed of separately,
because toxic and hazardous components can cause lasting damage to
health and the environment if disposed of improperly. As a consumer,
you are obliged under the Electrical and Electronic Equipment Act
(ElektroG) to return electrical and electronic equipment free of charge
at the end of its service life to the manufacturer, the point of sale or
to public collection points set up for this purpose. Details are
regulated by the respective state law. The symbol on the product, the
operating instructions and/or
regulations. By separating, recycling and disposing of old equipment in
this way, you are making an important contribution to protecting our
environment.
4. Packaging
Packaging can be disposed of free of charge in the appropriate
collection points - paper in the paper bin, plastics in the yellow bag
and glass in the
5. EG - Declaration of Conformity
With the CE mark XLOCK, a registered trademark of Data
Mobile, declares that the product meets the essential requirements and
directives European regulations.
6. Packaging Accessories
Mounting plate Double-sided adhesive
Keyboard
XLOCK Wireless Keypad
67,7 x 96,3 x 29,9 mm
4 x AAA
3V
XL Lock Manager APP, Webservice:
www.xlock.app; Made in Austria
the packaging indicates
waste glass container.
Screw
these