LINKIND LL20004 Benutzerhandbuch Seite 4

4. The default mode of the product is OFF mode. Press the switch to select your
desired lighting mode.
switch
5. Make sure the motion sensor is pointing outward, slide down the light to fit
into the mounting bracket until you hear a "click" sound, finish the installation.
6. You can remove the lamp from the mounting bracket and use it as a table lamp.
7. This product is not only solar powered but rechargeable with Type-C connection.
Please follow below steps to charge the light:
Pull out the rubber protective port cover, connect the light with your own Type-C
cable and adapter (both not included). The indicator will turn to orange while
charging and turn off when charged to the full. Then unplug the cable and fit tight
the rubber cover against water and dust.
Suitable Adapter: Input 5V, Output 500mA(or above)
Type-C
4